XE-7D-WK - Type 1 #01AB4C

Replace this seal when replacing the piston / cylinder kit, and if air is leaking from the head at the outlet.

Old Part Numbers: Z-A08548, Z-D29777Broken valve causing slow pump up or no compression at all? Replace this valve plate kit to restore compression (make sure piston and cylinder are not worn as well). NOTE: The D30139 Gasket Kit must be...

Old Part Numbers: KK-4930, KK-4949Order this kit if replacing the N017592SV Valve Plate Assembly. Used on many Craftsman, DeVilbiss, DeWalt, and other units. If the compressor pump doesn't seem to pressurize as quickly as it should or is leaking in...

Torque head bolts down to 52 in/lbs.

Old Part Numbers: CAC-1213

Also available in Fastener Kit # KK-4929. Torque head bolts down to 52 in/lbs.

Old Part Numbers: SSF-3147Part of piston/connecting rod kit.

Fastener kit for many DeVilbiss, DEWALT, and Craftsman direct-drive, oil-free air compressor pumps. Includes all bolts and screws for the pump.

Old Part Numbers: CAC-1199Replace this when replacing piston/cylinder. Used with NEW style valve plate.

Old Part Numbers: KK-4964Includes piston / rod assembly with piston ring, cylinder, and rod bearing.  If you have a sudden loss of performance, replacing the cylinder sleeve and piston ring usually restores compression in oil-free units. Inspect the...