Old Part Numbers: TF060402AVCampbell Hausfeld Tube Fitting with Compression Nut (175 PSI) for air compressors. Head Fitting including screws, compression nut, compression sleeve and o-rings.

Old Part Numbers: SV25200, SRV250200, 1229O-200, 9710533300, 136-0007RPAir compressor safety relief valve, 1/4" MPT, 200 PSI. If your valve leaks below the pressure listed on the side of the valve,...

Old Part Numbers: ST072321AV, 058-00123/4" compression nut & sleeve (2 required). For air compressor units made before 05/20/1994.

3/8" male NPT Drain Cock for the tank. Prevent rust from ruining your tank by draining your tank daily. Keep an extra around for a spare!

Air compressor check valve, 3/4" Compression x 3/4" MPT with 1/8" FPT side port.  If the small unloader (bleeder) valve on or under your switch leaks constantly AFTER the unit shuts off, replace this...

Old Part Numbers: ST074415AV, ST120200AV, ST073236AVIncludes six (6) screws.

Old Part Numbers: BG217000AJSquare Wire Air Compressor Belt Guard (Front).  If you need the back Belt Guard as well, order BG217100AV.

Old Part Numbers: BG217100AJNew OEM belt guard replacement (back). This is the base of the belt guard that fastens to the compressor. Protect your fingers from moving parts. OSHA required.

Old Part Numbers: STD-3353/8"-16 flange nut. Also used on models VT627000, VT629100, VT618202 and VT622001.

Old Part Numbers: 154-5L700Air compressor v-belt, 5L700. Replace if frayed or slipping.Specifications B-type belt, 5/8" wide Outside Dimension: 70" "B" Belt Conversion: B67

Old Part Numbers: ST016500AV

Old Part Numbers: ST000600AV(1/4)

Old Part Numbers: MC022393AV5 HP Electric Motor for air compressors. Used on many Campbell Hausfeld, Husky, and Speedaire models.Specifications Model: MC022393IP Power: 5 HP Voltage: 208-230...

Used on models CE725200FP, CE725300FP

Old Part Numbers: TF063501APUnloader Tube that runs from the Check Valve to the Pressure Switch.

Old Part Numbers: MC022394IP5 HP, 3 PHASE. Used on model CE725300FP and others.