Old Part Numbers: Z-AC-0032, AC-0032Valve plate comes with preinstalled valves and o-rings. Poor performance or air leaks out of the intake filter while the unit is running? This is probably the...

Old Part Numbers: K0058, K-0058, K0650, K-0650 Sears 919.16014, 91604, K-0650Compression ring replacement kit includes the cylinder, piston ring, retaining screw, o-ring, and head o-ring. Restores...

There are several different air compressor cooling fan styles. Choose this if yours looks like this one. Replace if cracked or missing fins.

Adjustable air regulator assembly for air compressor units that have a 4-port pressure switch. 1/4" FPT inlet/outlet, 1/8" FPT port for pressure gauge (to maximize performance, we recommend including...

O-ring Seal for the discharge (outlet) tube to the pump head.

Keep your air compressor from sliding all around your vehicle or floor. Order extra for future use.Specifications Height: 3/4"  Diameter: 1-1/2"

Old Part Numbers: NTB14Use this nylon tube if your air compressor pressure switch has a plastic unloader valve with a quick-connect fitting. Note: sold by the foot (quantity of 1 = 1 foot or 12...

O-ring seal for air compressor valve plate, installs in between the cylinder and valve plate. Used with origina

Old Part Numbers: 5130038-00, 5130024-001/4" OD brass compression nut and sleeve for bleeder (unloader) tube for air compressors.

Must order quantity of 4 for complete set. 1/4"-20 x 1-1/4 length.

Order this if ordering valve plate or a new head.

Brass compression nut and sleeve for 3/8" OD tubes.

Hubbell 69JF7LY2C Pressure Switch, 4-Port (1/4" female NPT), 95/125 PSI factory preset with unloader valve. Replace the pressure switch if the unit doesn't cut on or off at the designated pressure...

New style filter assembly with 3/8" threads. Includes new style air filter, head, and o-ring. Note: Do NOT order if your head has 2 holes on the SAME side of the head. This head has 3/8" FPT threaded...

1/4" NPT Heavy Duty drain cock. Prevent rust from ruining your tank by draining your tank daily. Keep an extra around for a spare.

Hex Nut for the pump head. The discharge tube attaches to this part. Order the required AC-0781 O-ring Seal as well if needed.

Screw to bolt the fan to the motor, .250-20 x .750 U.

Old Part Numbers: SSW-7367Strain relief for air compressor power cord going into the pressure switch housing.

Screw that fastens the front and back of the belt  guard to each other, and to the compressor base. THD FORMING

Plastic shroud (cover) Screw, #10-9 x .500 Thd. 

Old Part Numbers: SSF-3158-1This is the screw that holds down the piston cover, on the top of the piston.

Screw for the eccentric bearing assembly on crankshaft.

Old Part Numbers: CAC-4205, SUDL-402-2Assembly Cord Motor SJT for air compressors.

Old Part Numbers: Z-GA-370300PSI,2IN,1/4NPT,BK

Old Part Numbers: SSF-993 Also available in Fastener Kit # KK-4929.

Old Part Numbers: SS-6506-CD, SSN-60-ZN, 5140018-43 item. Please order replacement item.