Old Part Numbers: Z-AC-0032, AC-0032Valve plate comes with preinstalled valves and o-rings. Poor performance or air leaks out of the intake filter while the unit is running? This is probably the...

Old Part Numbers: K0058, K-0058, K0650, K-0650 Sears 919.16014, 91604, K-0650Compression ring replacement kit includes the cylinder, piston ring, retaining screw, o-ring, and head o-ring. Restores...

Plastic fan to cool pump and motor. 6" outside diameter.Specifications Length: 5" Width: 5" Height: 1.850"

O-ring Seal for the discharge (outlet) tube to the pump head.

Old Part Numbers: NTB14Use this nylon tube if your air compressor pressure switch has a plastic unloader valve with a quick-connect fitting. Note: sold by the foot (quantity of 1 = 1 foot or 12...

Head Gasket

O-ring seal for air compressor valve plate, installs in between the cylinder and valve plate. Used with origina

Order this if ordering valve plate or a new head.

Brass compression nut and sleeve for 3/8" OD tubes.

Isolator for the pump/motor assembly base. NOTE: To replace all of them you will need to order a quantity of 3. Keep your compressor from vibration damage and replace if any are missing.

Hex Nut for the pump head. The discharge tube attaches to this part. Order the required AC-0781 O-ring Seal as well if needed.

Old Part Numbers: AB-ACG18Saddle mount cup for the motor/pump feet. This installs on the mounting feet of the motor/pump assembly and keeps it from vibrating, as well as reducing noise.

Old Part Numbers: SRV187150, SRV187-1/8Air compressor safety valve, 150 PSI, 1/8" male NPT. If your valve leaks below the pressure listed on the side of the valve, replace this vital safety feature.

Old Part Numbers: 68-4-21/8" male NPT x 1/4" compression adapter for air compressor unloader/bleeder line. A very common adapter to attach the 1/4" OD unloader/bleeder line from the unloader valve on...

Screw, .250-20 x 1.25" U. This is one of the screws for the pump head; also used to attach the saddle mount cup/foot to the base of the pump.

Old Part Numbers: SSF-3158-1This is the screw that holds down the piston cover, on the top of the piston.

Screw, #10-14 x 2.50". This is the screw for the air intake muffler cover (2 used).