Old Part Numbers: 072-0006Replace this air compressor drain valve if leaking or will not work. Prevent rust from ruining your tank by draining your tank daily. Keep an extra around for a spare. This...

Old Part Numbers: 5130038-00, 5130024-001/4" OD brass compression nut and sleeve for bleeder (unloader) tube for air compressors.

Old Part Numbers: GA030000AV, A14993, E110954, GA016700AV, GA031000AV, GA015000AVAir Compressor Pressure Gauge. 2" OD Face, 1/4" NPT bottom-mounted thread, 300 PSI gauge. Buy a second one to ensure...

Includes two O-Rings (2" OD). This is the large O-ring Seal for the inspection port/bushing on the side and bottom (where the drain cock is) of the air tank.

If your valve is leaking on the side of the switch, do not order this part. Order check valve instead.

Reducer Bushing for the tank, 2" male NPT x 1/4" female NPT. Remember to apply Teflon tape to the threads.

Reducer Bushing for the tank, 2" male NPSM x 3/4" female NPT. Remember to apply Teflon tape to the threads.

Set screws for air compressor motor pulley. Includes 2. Torque to 145 - 180 in/lbs. 

Replacement 16 in. Flywheel for 2 Stage Husky Air Compressors

Old Part Numbers: E108472

This drain valve extension kit makes draining the moisture from your tank an easy task. If you don't have clearance to fit a pan under the tank drain, this extends the drain to allow you to easily...

Kit of 2

(175 PSI)

(3/4" NPT x 3/4" OD Tube) If your pressure switch is leaking at the unloader valve, replace this part.

4" x 4" rubber isolator pads.

(.75). Does NOT include the Discharge Tube.

Old Part Numbers: E106512