Old Part Numbers: 058-00073/8" OD compression nut and sleeve (ferrule) for the air compressor transfer tube.

Crankcase breather assembly for air compressor models with threaded type crankcase for the breather. This assembly tightens into the crankcase; typically has an oil-level sight gauge.

Old Part Numbers: 68-6-41/4" NPT x 3/8" OD compression adapter for air compressors. If your pump has an 'X' in front of the serial number and your supply tube measures 3/8" OD, order this part.

Old Part Numbers: 034-0184The Condor 12AC2FAKH OEM pressure switch replacement is an MDR12 style, 4-port, 1/4" female NPT pressure switch with manual on/off switch and 90-degree push-connect style...

Old Part Numbers: E10818512" OD Flywheel for the 130/165, 753H/755H, 040-0352, 040-0354, 040-0429, and 040-0430 model air compressor pumps. NOTE: The old pump used a 10" OD flywheel, which is now...

Old Part Numbers: SRV250170, 1229O-170Air compressor safety relief valve, 1/4" MPT, 170 PSI. If your valve leaks below the pressure listed on the side of the valve, replace this vital safety feature...

Head Gasket only. We always recommend replacing all head gaskets at the same time, as the other gaskets can be compromised once the head is removed. Note: We recommend you replace the Cylinder Gasket...

This complete head & valveplate assy includes the complete head, felt filter with screen, 019-0240 hollow-style air filter, valve plate assy w/ valves installed, the head gasket, and cylinder gasket...

Old Part Numbers: PG0250300BTBottom-mount, 1/4" MPT, 300 PSI air compressor pressure gauge.Specifications NPT: 1/4" Dial / Face: 2" PSI: 300 PSI Bottom-Mount 

Head Gasket only. Replace if you remove the head, if leaking, or you have a loss of compression. Recommended to replace the cylinder gasket as well.

Old Part Numbers: 145-0313Transfer tube for units that used a 3/8" OD tube only. Replace if bent or leaking (order compression and sleeves also).

Old Part Numbers: S118-0032Metal Filter Screen for the 130/165 Coleman Powermate/Sanborn style pumps.

Valve plate assembly (includes gaskets). Two valves are located in the head and two valves located in the valve plate (head not included). If air leaks out of the intake filter or if the compressor...

Felt air filter for the 753H air compressor pump. Replacing the pump's air filter regularly is important to maintain the performance and longevity of your air compressor. A clean filter element...

Complete gasket kit for 753H / 755H air compressor pumps, including crankshaft seal. Includes: head gasket, valve plate / cylinder gasket, crankcase gasket, bearing cover gaskets, and oil seal. If...

Old Part Numbers: 032-0091, 032-0072Oil Gight Glass with O-ring. Replace if cloudy, cracked, or leaking.

Old Part Numbers: 60-4-61-4, 058-0017-MAT1/4" compression nut and sleeve. Order two, one for each end of the tube.

Old Part Numbers: 5140121-073/8" compression inlet x 1/2" male NPT outlet check valve with 1/8" hole and plug. If the small unloader (bleeder) valve on or under your pressure switch leaks constantly...

Improved air compressor air filter element for the PLASTIC filter assembly. Ours is better than the OEM. Metal construction and 2 seal-tight gaskets. Replacing the pump's air filter regularly is...

Overhaul kit for the 755H in-line pump. This overhaul kit includes items the head assembly, valve plate assembly, all gaskets, connecting rods, piston rings, and rectangular felt air filter element...

OEM Powermate Inline-Twin Air Compressor Pump Replacement, Complete Assembly, Single-Stage, 3.7 HP. 13.4 CFM @ 40 PSI. 755H cast-iron pump. Includes Flywheel and Felt Air Filter. Need oil? 

Ring set (two required).

OEM pressure switch. 125 PSI On/ 155 PSI Off. Replace the Pressure Switch if the unit doesn't cut on or off at the designated pressure the unit is set for. If the unloader valve is leaking on the...

Air compressor brass compression adapter, 1/4" compression x 1/8" male NPT.Specifications 1/4" Compression x 1/8" MPT

This Valve Plate & Head Kit is primarily for gas units that need the "hockey puck" 019-0329 Solberg air filter. The kit includes: 042-0116 head & valve plate kit, 019-0329 and 019-0220 hollow-style...

Head for 755H, L710014 air compressor pump. Has TWO outlets (one for the larger supply line and one for the smaller bleeder tube). Two valves are located in the head and two valves are located in the...

Old Part Numbers: E1059932" NPSM X 3/8" NPT SVC

Old Part Numbers: 145-0388 Connects between switch and check valve in tank.

Head and valve plate-to-cylinder gaskets for the E108176 valve plate assembly.

Old Part Numbers: 160-0224Electric Motor. See Specs below for more info.SpecificationsSpecs: 3.1 Running HP/7 Peak HP 3450 RPM 56 Frame 208/220 Volts Single Phase 5/8" Shaft Extra Details

Only available in the 125-0151KIT.

Old Part Numbers: 051-0110Ball-bearing for crankcase (206).

Complete overhaul kit for the 755H in-line air compressor pump. This overhaul kit includes items the head assembly, valve plate assembly, all gaskets, connecting rods, piston rings, and the round,...

Old Part Numbers: 006-0018For 4L (1/2") series air compressor belts. Confirm your pulley diameter before ordering.

Only available in the 125-0151KIT.

Old Part Numbers: 4L520Air compressor v-belt, 4L520. Replace if frayed or slipping.Specifications A-type belt, 1/2" wide Outside Dimension: 52" "A" Belt Conversion: A50

Old Part Numbers: 146-00255 mm key to keep flywheel from slipping.

This handy maintenance kit includes one air compressor air filter element for the PLASTIC filter assembly, and one (1) quart of high-quality full synthetic lubricant to keep your air compressor...

Ball-bearing for crankcase (205).

Complete Head/Valve Plate Assembly. Has ONE outlet in the head. Includes: Head Filter elements (canister and felt style) Valve Plate Assy with valves Head Gasket Valve Plate Gasket Head Bolts

Piston assy. (includes wrist pin and retaining rings). Two required.

Overhaul kit for the in-line, twin-cylinder 753H air compressor pump, includes complete gasket kit, conrod assembly (x2), conrod insert bearings, piston rings, head kit with air filter, valve plate...

Complete 753H air compressor pump replacement. Single-Stage, 1.9 HP. Cast-iron construction. Includes flywheel and air inlet filter. Just add oil then install your belt and discharge tube. This pump...

This handy maintenance kit includes one air compressor air filter element for the PLASTIC filter assembly, and one (1) quart of high-quality synthetic blend lubricant to keep your air compressor...

Old Part Numbers: CW000800AV, 69DJAAir compressor bleeder (unloader) valve. Replace if broken, but replace the check valve if this constantly leaks after the compressor shuts off.

Screw for strain relief.

Valve plate with preinstalled valves. NOTE! Does not include gaskets, order the head and valve plate gaskets seperately. Poor performance or air leaks out of the intake filter while the unit is...

Old Part Numbers: 166-0018Silver run capacitor 1-3 HP. 25 UF, 50/60 HZ, 370 VAC. Please note: Capacitors can not be returned for a refund unless proven to be defective.

One Rod Assy, order qty. 2 if you need to replace both rods. For 755H pump. NOTE: New Conrods do not have Insert Bearings, change in manufacturer of the Conrod. Bearings are machined into the casting...

Carrier (cap), drive end.

Crankshaft for 755H.

Old Part Numbers: 166-0028, 166-0121 (A.O. Smith)

Old Part Numbers: 026-0188

155 PSI Outlet port on the right