K7045V #01B00C
Loading Schematic
Model Numbers: K7045V
Repair Parts for the Kobalt model K7045V Stationary Single-Stage Oil-Bath Electric Air Compressor
Specifications
Unit Specs:
- 7 HP Peak/3.5 HP Running
- 12.2 SCFM @ 40 psi
- 10.8 SCFM @ 90 psi
- Max Pressure: 135psi
- 45 gallon tank
B3800 Pump Specs:
- 7.41 cfm @ 100 psi w/ 5 HP motor
- 3 - 5 HP
- Min RPM 700 Max RPM 1400
- Max Pressure 130 psi
- 13.78" for B3800
- Bore 2.36
- Stroke 1.97
- Belt A-1
- Weight 24 lbs.
- 11.02 L x 10.94 W x 12.75 H for B3000 13.00 L x 11.38 W x 13.56 H for B3800
- Bolt Footprint 7.44" Side to Side 5.62" Front to Back for B3000
- Oil capacity 1qt 12 ozs. for B3800
Extra Details
How to tell if you have a B3800 or a B2800 pump:
- B3800 Flywheel diameter is 13.78".
- B2800 Flywheel diameter is 11.02".
- NS18S pump had same parts except for head and aftercooler.
Manuals
Click here to order and download the Owner's Manual
Extras
We have your Kobalt K7045V parts here. Whether you need a pressure switch, check valve or a new pump, we have your parts. Kobalt K7045V parts are easy to come by at Master Tool Repair. We have helpful sales team members that can assist you with your repair. We have accessories as well as compressor oil to keep your pump running like a top. We keep the most popular Kobalt K7045V parts in stock and we can order most other parts in a matter of a few days. To make ordering easier, we have created the ability for you to order parts by simply enlarging the schematic and then using your mouse to hover over the actual part. You will see the part pop up and are able to order by simply choosing the quantity of parts that you need and adding them to your cart. Make sure to keep spare parts on hand so that your down time will be minimal. Replace your Air Filter and Oil every 3 to 4 months if used frequently. Use straight 30W compressor oil (20W below 34 deg). Drain your tank regularly to prevent rust, especially in humid climates. This unit was made by Chicago Pneumatic.
Technical Documents
Click here for torque settings
Standard break-in procedure:
1. Open drain tap
2. Turn on compressor for about 10 to 15 min.
3. Let it cool for 15 to 20 min.
4. Close drain tap.
5. Run air compressor until unit turns off by itself.
6. Ready for use.
-
Air Filter Assembly #05C183
Price: $7.69Old Part Numbers: 6229020500, 2881000Plastic style air filter assembly. Includes the filter housing and element, plus screws for B2800/B3800 pumps. Replace every 3-4 months if the air compressor is used frequently. A dirty filter can cause damage to the...Price: $7.69 -
Service Maint Kit, B2800, B3800 #05C09E
Price: $20.06Kit for one service on pump. Kit includes one plastic style air filter and 1 Qt. of 30W compressor oil. NOTE: Not for NS18S pump, which uses a different (round) air filter.Price: $20.06 -
Head #05C3B2
Price: $17.27Old Part Numbers: AB3860400Note: Head is ONLY for the NS18S. Gaskets required.Price: $17.27 -
Condor MDR21 Pressure Switch, 100/135 PSI, 4-Port, 90 Unloader, On/Off Lever #05C18B
Price: $25.25Air compressor pressure switch, 100 PSI cut-in / 130 PSI cut-out, 4 port, MDR21-style with 90-degree quick-connect unloader valve and auto on/off lever. Replace the pressure switch if the compressor no longer cuts in or out at the designated pressure...Price: $25.25 -
Oil Level 12 Gas Metal Case #05C1A1
Price: $9.32Old Part Numbers: 032-0044, 2236102992Includes oil sight glass and breather with gaskets.Price: $9.32 -
Price: $4.99
-
Filter Assembly without Screws (CPI) #05C7F9
Price: $5.93Air filter assembly without screws. Includes element with housing. Protect your air compressor pump from damage.Price: $5.93 -
Price: $28.98