Old Part Numbers: A19715, CAC-4337-1, D288261/2" male NPT x 1/2" compression check valve, with 1/4" compression adapter. For model D55167 type 1 and others. If the small unloader (bleeder) valve on...

Old Part Numbers: 5130038-00, 5130024-001/4" OD brass compression nut and sleeve for bleeder (unloader) tube for air compressors.

Old Part Numbers: 2901324963, 136-0049Air compressor intercooler safety valve for the B4900/T29S/B5900 pumps. If your valve leaks below the pressure listed on the side of the valve, replace this...

Complete gasket kit for the B5900 Air Compressor Pump. Includes the head, inner valve plate, cylinder, crankcase, oil pan, bearing cover, aftercooler and intercooler gaskets. If the compressor pump...

Old Part Numbers: Z-D20596, D20596OEM replacement pressure switch, 145/175 PSI. This switch replaces the Z-D20596. Replace the Pressure Switch if the unit doesn't cut on or off at the designated...

1/2" compression nut and sleeve, brass.

Air compressor oil site gauge and gasket. Replace if cloudy or leaking.Specifications 1" diameter

Old Part Numbers: 5281000, 019-0104Air filter assembly with element. Protect your air compressor pump from damage by keeping clean or replacing the air filter. Maximum flow of 35 CFM. Replacing the...

Old Part Numbers: ABP-459, Z-ABP-459, 040-0210, 4116090137B5900 Two-Stage Air Compressor Pump Replacement. Includes flywheel, aftercooler, and air filter assembly. Note: If your old B5900 does not...

Protect your pump from damage by keeping clean or replacing it. Fits B5900/B6000 pumps. Filter element only.

Old Part Numbers: 1000298, 9013013Air compressor connecting rod insert. Note: For T39/B5000/B5900 model pumps, order 2 of these if replacing one rod and order 4 of these if replacing both rods.

Old Part Numbers: 68-4-21/8" male NPT x 1/4" compression adapter for air compressor unloader/bleeder line. A very common adapter to attach the 1/4" OD unloader/bleeder line from the unloader valve on...

Includes all four (4) rings for the smaller, high-pressure (HP) piston (hone the cylinders before installation). For the B5000 and B5900 model air compressor pumps. If you have a sudden loss of...

Screw that fastens the front and back of the belt  guard to each other, and to the compressor base. THD FORMING

Old Part Numbers: 5130940-00, SSF-8080-ZNFlange nut to attach the wheel to the air tank.

Includes all 3 rings for the larger, low-pressure (LP) piston for the B5900 air compressor pump. Hone the cylinders before installation.

Old Part Numbers: PS3030RVUnloader Valve used on many Furnas / Hubbell brand air compressor pressure switches includes the unloader valve with compression nut and sleeve, and screw. Replace this part...

New 4LK600 v-belt for air compressors, 1/2" wide with a 60" outer circumference. Replace if worn or frayed.  Specifications Aramid FHP Replacement A-type belt, 1/2" wide Outside Dimension: 60" "A"...

This air compressor running gear kit includes the piston, connecting rod, ring kit, and c-clips for High-Pressure (small cylinder) side only. Don't forget to install new gaskets as well.

Old Part Numbers: SUDL-65

Old Part Numbers: GA016703AVReplacement Pressure Gauge, 300 psi, 2" Face, Back-Mount (1/4" male NPT).