1/4" Ball Valve Drain Cock for air compressors. Keep your tank from rusting. Replace this if it is leaking or will not work.

Old Part Numbers: SRV250150Air compressor safety relief valve, 1/4" MPT, 150 PSI, ASME. If your valve leaks below the pressure listed on the side of the valve, replace this vital safety feature...

Old Part Numbers: LB51111-5614RolAir Filters - 3 pack.

Air compressor check valve. 1/2" FPT x 1/2" FPT check valve with 1/8" FPT side port. Up to 20 SCFM If the small unloader (bleeder) valve on or under your switch leaks constantly AFTER the unit shuts...

Old Part Numbers: LBOILGLASS, LBTB3037Oil sight glass (gauge) for the PMP12PV02A and PMP13PT03A model air compressor pumps.

Comes with paper element.

Old Part Numbers: PMP13PT03AComplete single-stage replacement pump with flywheel and air filter. Just bolt it on, install your discharge tube and belt, add oil, and run. Does NOT include oil.  Need...

1/8" NPT x 1/4" air compressor elbow fittings. For COPPER tubing.

1/4" OD copper tubing. Sold by the foot (example: order qty 2 for 2 feet).

Old Part Numbers: MFBLNP0250X1500

If loose or dirty, replace these when rebuilding pump.

Hone cylinders before installing and stagger ring gaps. Includes three (3) separate rings (two compression rings and one oil scraper ring).

The Condor 31HC3EXXALZ OEM pressure switch replacement is an MDR3 style, 4-port, 1/4" female NPT pressure switch with manual on/off switch and 90-degree compression style unloader valve and is preset...

Old Part Numbers: MISC11101C(NOTE! Order qty 2 for 2 feet and include a note to "Bend for model 'x'" when ordering! Need to specify model number in comments in checkout page).

(Dipper)

Bare Cylinder for pump.

Single-Groove Pulley for Electric Motor, 4.0" OD x 7/8" bore.

Replace if missing cooling fins or cracked.

(Front)

Old Part Numbers: BG566B, BG567Complete belt guard assembly.

(90 Degree)

(Angled)

(Straight)

Replace this if the rings do not rotate freely in their grooves.