Model Numbers: 040-0221, 040-0222, 040-0429, 040-0430

Repair Parts for Sanborn 130 & 165 Pumps. 

New style pump has 1/4" FPT & 1/8" FPT outlet ports in head

• Your old head may be 1/2" and will need an adapter
• Part# 135-40042-SP is the adapter for old pumps with a 3/8" OD discharge tube
• Part# 135-40062-SP is the adapter for old pumps with a 1/2" OD discharge tube

Specifications

• Min RPM: 700
• Max RPM: 1200
• Max pressure: 125 PSI
• Max duty cycle: 50%
• Oil capacity: 18 oz.
• 130 Pump: 6.0 CFM @ 90 PSI (2 HP motor)
• 165 Pump: 10.1 CFM @ 90 PSI (5 HP motor)
• Weight: 39 lbs.
• Footprint: 5.75" S-S, 5.87" F-B
• For 2-4.5HP units, you have a 130 pump
• For 5HP and greater, they call it a 165 pump. The only difference is the crankshaft and connecting rods.
• Make sure of your pump model before ordering these parts or a new pump.
• New pump comes with felt style air filter. Old canister style not available with new pumps.
• New style pump has 1/4" FPT & 1/8" FPT outlet ports in head. (Your old head may be 1/2" and will need an adapter.)
• If replacing valve plate, please order the felt style filter and screen as the new style valve plate will not hold any other filter setups.

Extra Details

• Head bolt torque: 220-300 in lbs.
• Carrier bolt torque: 170-230 in lbs.
• Flywheel bolt torque: 150-250 in lbs.
• Bottom oil pan torque: 30-50 in lbs.
• Connecting rod torque: 160-200 in lbs.

Technical Documents

This short video shows the different air filter assemblies used on the Sanborn 130 pump and the Sanborn 165 pump.