NG-42 Pilot Unloader Check Valve #11631F
- Shipping:
- Calculated at Checkout
Description
Old Part Numbers: 885426, 724033, 6634, NG-42-M-110-140, NG-42-M, 6523, 118759
NG-42 pilot unloader check valve for air compressors.
Specifications
- Pre-set Pressure Range: 110-140 PSI
- Can Be Adjusted by 30-40 PSI
- Replacement for Hitachi Part Number 885426
- 1/2" Flare Inlet
- 3/8" Male NPT Tank Connection
- 1/8" NPT Side Port
Requirements
This pilot unloader check valve replaces the Hitachi part number 885426 for EC2510E Gas Compressors 110 - 140 PSI.
Extra Details
- The pressure setting on this valve can be adjusted by 30-40 psi up or down and is rated to handle 30 SCFM. They are used on both gas engines and electric motor compressors.
- The top inlet portion of the valve will connect to your main airline from your pump and is a 1/2" flare fitting.
- The bottom outlet will connect to your air receiver tank and is a 3/8" male NPT. The 1/8" Male NPT connection for the throttle control cable will connect to the throttle control port on the unloader.
- The Z bend tip of the throttle control cable will connect to the throttle arm on your engine.
- A muffler is included to reduce noise.