B09J500-20, B09JL500-20A #01AF7D
Loading Schematic
Model Numbers: B09J500-20, B09JL500-20A
Repair Parts for the Coleman Sanborn models B09J500-20, B09JL500-20A Portable Oil-Free Air Compressors
Â
This pump was used on over 100 models (many have 048-0088 on connecting rod for piston). This is a twin-head pump and uses two of the same pistons/connecting rods.
Â
Specifications
Too much to repair? Click here to purchase a new comparable unit!
Extra Details
- When replacing the 048-0074M piston/cylinder kit, do not push the piston in the cylinder from below or this will damage the piston ring and void your warranty. ALWAYS pull the connected rod down through the cylinder until it is 1/2 way down the cylinder, then slide the connecting rod down through the aluminum housing and turn crank until the rod will slide over the bearing.
- Tighten the connecting rod to the crank to approx. 40-50 in lbs. DO NOT OVER TIGHTEN!
- If your eccentric/crankshaft has any wear and your new piston/cylinder kit is not tight on the eccentric/crankshaft, a small amount of your new connecting rod ID may need to be removed. To do this, simply remove the retaining screw of the connecting rod, insert the connecting rod in a vise and take a hacksaw and make a cut where the connecting rod joins together (below the screw you just removed), just one hacksaw blade width. This will allow you to tighten your screw up a little more on the eccentric/crankshaft.
- Make sure to keep the air filter (002) clean. Grit will destroy your new piston and cylinder!
Manuals
Click here to order and download the Owner's Manual
Extras
We have Coleman Sanborn B09J500-20, B09JL500-20A parts here. Whether you need a pressure switch, piston kit or a regulator, we have your parts. Coleman Sanborn B09J500-20, B09JL500-20A parts are easy to come by at Master Tool Repair. We have helpful sales team members that can assist you with your repair. We have accessories as well as compressor oil to keep your pump running like a top. We keep the most popular Coleman Sanborn B09J500-20, B09JL500-20A parts in stock and we can order most other parts in a matter of a few days. To make ordering easier, we have created the ability for you to order parts by simply enlarging the schematic and then using your mouse to hover over the actual part. You will see the part pop up and are able to order by simply choosing the quantity of parts that you need and adding them to your cart. Make sure to keep spare parts on hand so that your down time will be minimal. If compression is low it's probably due to a damaged Piston/Compression Ring or damaged Reed Valves in the Pump. This is a very old model and unfortunately many OEM parts are now obsolete.
-
On Sale
Valve Assembly for Regulator #116293
Now: $9.95Was: $25.99Valve assembly for the Sanborn regulator. Only includes the items pictured. This is obsolete but we have limited stock. Once it's gone, it's gone for good!Now: $9.95Was: $25.99 -
On Sale
Compression Adapter, 1/4" NPT x 3/8" OD #0E52EE
Now: $7.99Was: $9.96Old Part Numbers: 68-6-41/4" NPT x 3/8" OD Compression Adapter for air compressors. If your pump has an 'X' in front of the serial number and your supply tube measures 3/8" OD, order this part.Now: $7.99Was: $9.96 -
Price: $10.17
-
Price: $175.55
-
Price: $10.17
-
On SaleNow: $9.95Was: $18.27
-
Price: $6.06
-
Coleman Powermate Air Compressor Piston / Cylinder Kit #058D59
Price: $162.17New piston/cylinder rebuild kit includes the piston/rod assembly with compression ring, cylinder sleeve, and o-ring. Replacing the cylinder sleeve and piston ring usually restores compression in oil-free units. Inspect the reed valves as well, but unless...Price: $162.17 -
Grommet #059008
Price: $7.38Old Part Numbers: 093-0050Rubber grommet for pump/motor assembly. Keeps your motor stable and reduces vibration.Price: $7.38 -
Price: $12.72
-
Capacitor #058DAD
Price: $194.00Old Part Numbers: 166-0018Silver run capacitor 1-3 HP. Click Here to view part 25 UF, 50/60 HZ, 370 VACPrice: $194.00 -
Price: $15.82