Crankcase-to-Cylinder Gasket, 2.75" Bore, VT-style #01A8C4

Crankcase-to-cylinder gasket for old-style "VT" twin-cylinder pumps with 2.75" bore.

f the compressor pump doesn't seem to pressurize as quickly as it should or is leaking in between the head, valve plate, cylinder, or crankcase while running, there's a good chance you need to install new gaskets. You can spray soapy water on the pump while it's running to inspect if there are any bubbles forming, which would indicate a leak.

Remember to tighten the bolts down to the proper torque specs as noted by the manufacturer.