L5006016, L6506016, L7006016, XL5006016 #01B098
Loading Schematic
Model Numbers: L5006016, L6506016, L7006016, XL5006016
Repair Parts for the Coleman Powermate L5006016, L6506016, L7006016 XL5006016 Stationary Single-Stage Electric Air Compressors
This unit uses the "165" model Pump (5 HP and up)
Specifications
165 Pump specs:
- Min RPM 700
- Max RPM 1200
- Max pressure 125 psi
- Max duty cycle 50%
- Oil capacity 18 oz.
- 130 Pump 6.0 cfm @ 90psi (2 HP motor)
- 165 Pump 10.1 cfm @ 90spi (5 HP motor)
- 39 lbs.
- Torque specs (see Schematic on "Description" tab)
- For 2-4.5HP units, you have a 130 pump
- For 5HP and greater they call it a 165 pump. The only difference is the crankshaft and connecting rods.
- Make sure of your pump model before ordering these parts or a new pump.
- New pump comes with felt style air filter. Old canister style not available with new pumps.
- New style pump has 1/4" FPT & 1/8" FPT outlet ports in head. (Your old head may be 1/2" and will need an adapter.)
- If replacing valve plate or purchasing short block, please order the felt style filter and screen as the new style valve plate will not hold any other filter setups.
Extra Details
Â
NOTE! If you are replacing the Pressure Switch, the new Switch has a "quick-connect" Unloader Valve and it will not accept the original aluminum Bleeder Tube, you must order the Nylon Tube Kit 18 also.
Â
Manuals
Click here to order and download the Owner's Manual for the L6006016, L6506016, L6006016 model Air Compressors
Click here to order and download the Owner's Manual for the L5006016 and L7006016 model Air Compressors
Technical Documents
Pump torque specs:
- Head bolt torque 220-200 in lbs.
- Carrier bolt torque 170-230 in lbs.
- Flywheel bolt torque 150-250 in lbs.
- Bottom oil pan torque 30-50 in lbs.
- Connecting rod torque 160-200 in lbs.
Video
This short video shows the different air filter assemblies used on the Sanborn 130 pump and the Sanborn 165 pump.
Â
-
Bearing Carrier with Bearing #058FE4
Now: $29.95Was: $50.31Old Part Numbers: 045-0043Bearing carrier and bearing for flywheel end..Now: $29.95Was: $50.31 -
Price: $29.74
-
Price: $40.96
-
165 Air Compressor Pump Replacement without Flywheel, 5 - 6.5 HP, Single-Stage #058D69
Price: $272.86Old Part Numbers: 040-0311165 Air Compressor Pump with felt air filter to replace the original pump. For 5 to 6.5 HP units. Flywheel NOT included. Swap out your old flywheel or order a new flywheel, add oil, and run. You can also order the pump with...Price: $272.86 -
53" Long V-Belt, 4L530 #058EE4
Price: $21.03Old Part Numbers: 007-0037Classic V-Belt for air compressors. Check to see if yours is 4L530 (53" length). A-type belt, 1/2" wide Outside Dimension: 53" "A" Belt Conversion: A51Price: $21.03 -
Price: $216.90
-
Oil Pan Gasket #058D79
Price: $24.14If replacing crank or rings, replace this gasket. (14 bolt style)Price: $24.14 -
Price: $589.82
-
Coleman Powermate 130/165 Air Compressor Pump Valve Plate Kit #058D45
Price: $71.67Includes the valve plate assembly with preinstalled valves, head gasket, and cylinder gasket. If air leaks out of the intake filter or if the compressor just isn't performing like it should, order this kit. A loss of pressure or slow pressurization is...Price: $71.67 -
Valve Plate Gaskets #05C0B9
Price: $52.93Includes (1) 046-0151 Head Gasket and (1) 046-0152 Cylinder Gasket.Price: $52.93 -
Compression Nut & Sleeve, 3/8" #11623A
Price: $4.08Old Part Numbers: 058-00073/8" OD Nut for the transfer tube.Price: $4.08 -
Valve Plate Assembly with Filters #05C100
Price: $84.27Includes Valve Plate Assembly with both gaskets and two (2) felt filters. Restore compression and keep your new valves in good shape with this convenient kit. Poor performance or does air leak out of the intake filter while the unit is running? This is...Price: $84.27