TUBE UNLOADER CENTRIFUGAL CU EQ PMP EQ78 #0583BF

SCREW CAP HEX HD GR5 ST BLK 5/16-18X3/4 #0579E9

SCREW,CAP,HEX HD,GR5,ST,BLK

OIL,PUMP,SYNTHETIC,BLUE,1 GALLON,ESG #057B1C

Old Part Numbers: ESG1 Gallon of Jenny Synthetic Blue Pump Oil.

Wingnut #0577DB

Old Part Numbers: L55Wingnut for old style air filter.

CAP BEARING L PUMP CI 3 HOLES PAINTED L2 #058469

Rebuild Kit #057743

Old Part Numbers: 610-1128Complete Rebuild Kit for EQ, EQU, GT, GTU, and Y pumps. Rebuild Kit includes Rings, Gaskets, Valves and canister style Air Filter Elements for both banks. Order 150-1104 if you have the older, "hockey puck"-style filter elements...

G, GC, MG, L, LC, D, Repair Kit #057718

Old Part Numbers: G101, 610-1124Rebuild Kit for entire pump. Includes Rings, Gaskets, Valves and canister style Air Filter Elements. NOTES: Order L54E if you have hollow, wing nut style filters. Head gasket is for 5 hole style.  Order part # 104-1008 if...

PIN COTTER ST BLACK 116DIAX12LG EQ73B #057A15

Old Part Numbers: EQ73B

CRANKCASE G PUMP CI MACHINED Y1A #05847B

PIN PISTON STEEL EQ35 #057771

Old Part Numbers: EQ35High Pressure wrist pin.

KIT ELEMENT FILTER G54E PKG OF 4 G54EP #057A01

Old Part Numbers: G54EPPkg of four G54E Filter Elements. Element only for air filter assembly.

Crankcase Bolt #057753

Old Part Numbers: K14Crankcase bolt (oil fill), K series

UNLOADER CENTRIFICAL PUMP ASSY EQ170 #0577B9

Old Part Numbers: EQ170Weight Assy. for Cent. Unloader.

KIT BASIC REPAIR GTU PUMP GTU101 #0576B6

Old Part Numbers: 610-1129, EQU101, GTU101Rebuild Kit Incl. Rings, Gaskets, Valves, Unloader Valves and Air Filter Elements (L54E hollow style).

KIT FILTER ASSY G154 PKG OF 4 G154P #0583F7

Old Part Numbers: G154PIncludes four G154 Filter Assemblies.

SCREW ROD STEEL WLOCK WASHER 14-20 L22 #057807

Old Part Numbers: L22

Piston Assy w/ Rings #05781B

Old Part Numbers: K132Replace this if the rings do not rotate freely in their grooves. Includes one each of: piston, ring set, bumpers and wrist pin.

Bearing, Crankshaft #0576EE

Old Part Numbers: K9Bearing for crankshaft. Order one for each side.

TUBE UNLOADER HEAD-HEAD CU MGU PUMP LU88 #057A51

Old Part Numbers: LU88Unloader  Tube w/ Fittings

GT Pump #057683

NOTE! This pump currently has a lead time of 18 weeks. See Specs for CFM output. This pump replaces the EQ pump. New pump w/ flywheel & air filter assemblies. Typically used on electric motor-driven units. Has two-groove Flywheel.SpecificationsCFM...

Tube, Operating, Centrifical Unloader #057A0F

Old Part Numbers: EQ71

Right Head, Unload Type #057769

Old Part Numbers: EQ180 Right Head for constant run units (includes unloaders).  Sale item - 2 in stock (no retuns)  For Emglo pumps: Emglo GT, GTU, W, Y, and other model Emglo pumps. 

Oil Seal #0576CC

Old Part Numbers: K11EOil leaking around the shaft? Remove flywheel and replace this seal.

GT Valve Kit #05BF6E

Everything you need for a valve job. Includes, intake, exhaust valves. Even includes necessary gaskets. Torque head bolts to 250 in/lbs.

GTU Valve Kit #05C055

Everything you need for a valve job. Includes, intake, exhaust and unloader valves. Even includes necessary gaskets. Torque head bolts to 250 in/lbs.

Bearing #05773D

Old Part Numbers: L9If loose or dirty, replace these when rebuilding pump.

BOLT STUD HEX ST 516-18X2-14X58 K52-1 #057A99

Old Part Numbers: K52-1

VALVE UNLOADER CENTRIFICAL ASSY EQ174 #0576B4

Old Part Numbers: 120-1170If yours leaks or does not unload the pump to start, try replacing this assembly. Located on the end of your pump. Has a supply line that runs to the head.

PISTON PUMP ALUMINUM MACHINED K32 #057A43

Old Part Numbers: K32 Piston and bumpers (no rings).

Unloader, Centrifugal, Weight, Set #057A0D

Old Part Numbers: EQ70

COVER FILTER WDECALS L54 #0581B6

SCREW CAP HEXHD GR5 ST BLK 516-18X2-14 #057A45

INTERCOOLER FINNED WFLARE NUTS ASY EQ65 #0576E8

Old Part Numbers: EQ65Finned intercooler tube w/ flare nuts. (furthest from flywheel)

INTERCOOLER FINNED WFLARE NUTS ASY EQ62 #0576E6

Old Part Numbers: EQ62Finned intercooler tube w/ flare nuts. (closest to flywheel)

ELBOW MALE COMPRESSION BR 14TBX18 #0577E7

1/4" x 1/8" Compression Elbow. For COPPER tubing. If you are using Nylon or Plastic tubing, consider using our T1059.

BUMPER WRIST PIN PLASTIC K36A #057749

Old Part Numbers: K36AWrist Pin Retainer (Bumper).

Pin, Pivot, Unldr, Cntrfcl, W/ctr Pin #057A13

Old Part Numbers: EQ73

TEE BRANCH BRASS 14 #057781

1/8" MPT x 1/4" compression T

TUBE BREATHER BENT CU MGUGCUGTU L18 #057A3F

Old Part Numbers: L18

Bracket, Filter #0579FF

Old Part Numbers: L53BRACKET,FILTER

VALVE PLATE, W PUMP, CI, PAINTED, BLUE, #0579F5

Old Part Numbers: W40, 220-1041PLATE,VALVE,W PUMP,CI,MACHINED

PIN PISTON STEEL HARDENED K35 #057747

Old Part Numbers: K35Wrist Pin (Piston Pin) for conrod.

Crankshaft #0576BC

Old Part Numbers: Y20AIf yours is pitted or grooved, replace it. Use new connecting rods.

Gasket Set #05767F

Old Part Numbers: L100All the gaskets necessary to rebuild your D, DC, DCU, G, GU, GCU, L, LC, LU, LCU, MG or MGU Pump. (Incl. L3, L4,2-K31,2-L41,2-L51)

ELEMENT FILTER AIR COMPRESSOR JENNY G54E #057A59

Old Part Numbers: G54E

CYLINDER K PUMP CI PAINTED BLUE K30 #057759

Old Part Numbers: K30Cylinders for K series and D/DC/DCU pumps.

Spring, Unloader, Centrifical #057A11

Old Part Numbers: EQ72

Hi Pressure Connecting Rod #0576B2

Old Part Numbers: L21WThis is the one with the EQ38 bronze bushing insert. You need 3 L21L connecting rods and one of these to replace all 4 connecting rods. Order wrist & roll pin also if needed. Works with old style (non-bearing) and new style.

GU, GCU, LU, LCU, MGU Repair Kit #057681

Old Part Numbers: 610-1125, DU101, GU101Rebuild Kit for entire pump. Incl. Rings, gaskets, valves, unloaders and canister style air filter elements (L54E hollow style) for GU, GCU, MGU Pump.

NIPPLE CLOSE STEEL SCH 80 PLATED 12 #057BE2

Old Part Numbers: 122-1042-JE Jenny Pipe Nipple (122-1144)

CONNECTOR,MALE,COMPRESSION,BR,1/4TBX1/8" #057BEB

Flywheel, 13.25" OD #057761

Old Part Numbers: 220-1032, EQ2313.25" flywheel for model "DC" pump, includes K25 roll pin