919.165600 #01B0D5
Loading Schematic
Model Numbers: 919.165600
Repair Parts for the Craftsman 919.165600 Stationary Oil-Free Direct-Drive V-Twin Electric Air Compressor
NOTE: Read the information below if replacing the connecting rod/ piston assemblies!
WATCH VIDEO PRIOR TO INSTALLATION
PLEASE READ ALL DETAILS BEFORE ORDERING...
If you have a V Twin unit, this will fit those units that used this same kit on both sides (requires a spacer washer). A spacer washer between the eccentric and the rod is required. It allows the connecting rod to line up with the cast cylinder housing. If not, the cylinder cup is too close to the motor.
If you have a V Twin unit that used a different high-pressure kit on one side, this will only fit the low-pressure (LP) side.
NOTE: This new conrod does not have a bolt that fastens it to the eccentric shaft. It is a press-on fit.
-
Z-AC-0032 Valve Plate Assembly #05BF78
Price: $23.47Old Part Numbers: Z-AC-0032, AC-0032Valve plate comes with preinstalled valves and o-rings. Poor performance or air leaks out of the intake filter while the unit is running? This is probably the...Price: $23.47 -
Compression Ring Replacement Kit #0E5368
Price: $36.00Old Part Numbers: K0058, K-0058, K0650, K-0650 Sears 919.16014, 91604, K-0650Compression ring replacement kit includes the cylinder, piston ring, retaining screw, o-ring, and head o-ring. Restores...Price: $36.00 -
Cooling Fan, Pump #0999D5
Price: $18.47Plastic fan to cool pump and motor. 6" outside diameter.Specifications Length: 5" Width: 5" Height: 1.850"Price: $18.47 -
Price: $3.95 -
NYLON TUBING #0E5DA0
Price: $3.60Old Part Numbers: NTB14Use this nylon tube if your air compressor pressure switch has a plastic unloader valve with a quick-connect fitting. Note: sold by the foot (quantity of 1 = 1 foot or 12...Price: $3.60 -
Check Valve, 1/2" NPT X 1/2" Comp, 1/4" Comp Adapter #116393
Price: $12.69Old Part Numbers: A19715, CAC-4337-1, D288261/2" male NPT x 1/2" compression check valve, with 1/4" compression adapter. For model D55167 type 1 and others. If the small unloader (bleeder) valve on...Price: $12.69 -
On Sale
Pump head 3/8" FPT filter port and 3/8" outlet port #0E538F
Now: $13.30Was: $13.68Old Part Numbers: AC-0037, ACG-26Pump head 3/8" FPT filter port and 3/8" outlet portSpecificationsThis head has 3/8" FPT threaded ports on both sides. If your head has a 3/8" port 90° from the air...Now: $13.30Was: $13.68 -
Cylinder O-Ring, 2.759" / 2.719" ID #0E5391
Price: $3.60O-ring seal for air compressor valve plate, installs in between the cylinder and valve plate. Used with originaPrice: $3.60 -
Compression Nut & Sleeve, 1/4" OD #11624C
Price: $1.03Old Part Numbers: 5130038-00, 5130024-001/4" OD brass compression nut and sleeve for bleeder (unloader) tube for air compressors.Price: $1.03 -
Screw, 1/4"-20 x 1-1/4" #099D5C
Price: $3.95Must order quantity of 4 for complete set. 1/4"-20 x 1-1/4 length.Price: $3.95 -
Price: $7.56 -
Price: $4.73 -
3/8" Compression Nut & Sleeve #11624E
Price: $1.84Brass compression nut and sleeve for 3/8" OD tubes.Price: $1.84 -
Compression Ring, Pre-Formed #1166D7
Price: $22.00Air compressor compression ring, pre-formed. Note: After you install the ring on the piston rod, install the rod in the cylinder by inserting the rod from the top of the cylinder and pull it down...Price: $22.00 -
Hubbell Pressure Switch, 4-Port, 95/125 PSI, With Unloader Valve #048A91
Price: $79.24Hubbell 69JF7LY2C Pressure Switch, 4-Port (1/4" female NPT), 95/125 PSI factory preset with unloader valve. Replace the pressure switch if the unit doesn't cut on or off at the designated pressure...Price: $79.24 -
Isolator #09A175
Price: $3.95Isolator for the pump/motor assembly base. NOTE: To replace all of them you will need to order a quantity of 3. Keep your compressor from vibration damage and replace if any are missing.Price: $3.95 -
Air Regulator, 1/4" FPT, 4-Port #0E5375
Price: $14.59Universal Regulator: 4-port, two 1/4" FPT ports, and two 1/8" FPT ports (gauges sold separately here). The regulator controls the amount of air in your air compressor hose. Replace this if you're not...Price: $14.59 -
Nut, .563"-18 UNF HEX #09A12E
Price: $18.20Hex Nut for the pump head. The discharge tube attaches to this part. Order the required AC-0781 O-ring Seal as well if needed.Price: $18.20 -
Saddle Mount Cup #099BD2
Price: $7.16Old Part Numbers: AB-ACG18Saddle mount cup for the motor/pump feet. This installs on the mounting feet of the motor/pump assembly and keeps it from vibrating, as well as reducing noise.Price: $7.16 -
Safety Relief Valve 1/8" MPT, 150 PSI #1162C1
Price: $9.84Old Part Numbers: SRV187150, SRV187-1/8Air compressor safety valve, 150 PSI, 1/8" male NPT. If your valve leaks below the pressure listed on the side of the valve, replace this vital safety feature.Price: $9.84 -
Compression Adapter, 1/4" Compression x 1/8" MPT #100B8A
Price: $3.66Old Part Numbers: 68-4-21/8" male NPT x 1/4" compression adapter for air compressor unloader/bleeder line. A very common adapter to attach the 1/4" OD unloader/bleeder line from the unloader valve on...Price: $3.66 -
Screw, .250-20 x 1.25" U #099DE2
Price: $14.36Screw, .250-20 x 1.25" U. This is one of the screws for the pump head; also used to attach the saddle mount cup/foot to the base of the pump.Price: $14.36 -
Screw, #10-24 x .750 TH #1166A4
Price: $3.60Old Part Numbers: SSF-3158-1This is the screw that holds down the piston cover, on the top of the piston.Price: $3.60 -
Screw, #10-14 x 2.50" Pa #09A132
Price: $14.29Screw, #10-14 x 2.50". This is the screw for the air intake muffler cover (2 used).Price: $14.29