PNMTC WHL 10 CNTRD GREY HUB WHEEL #11639F

Old Part Numbers: WA005501AVWheel - 10 inch.

Round Foot Isolator Pad #116360

Old Part Numbers: ST158300AVKeeps your compressor from dancing around!

1/2" MPT Air Filter Assembly #0A12A0

Metal Assy, 1/2" MPT x Ht 3.80" x W 3.25" Twist Lock. Uses 06 element.

Compression Conn Fitting Assembly 1/2 X 3/8 MPT #01A902

Old Part Numbers: ST159001AV, ST159001AJCompression Connector, 1/2" Comp X 3/8" MPT. 

Ball Bearing #01A8DC

BALL PLUG 7/8 #01ABA5

Crankcase Breather Vh & Vt CHA #01AA8D

Breather assembly for models for threaded type crankcase. This assembly tightens into the crankcase; typically has an oil level sight gauge.

PIPE PLUG 14-18 NPT #01A8C6

Old Part Numbers: STD-220, ST022000AV, ST072915AV, ST072917AV1/4-18 IND HX HD

SHAFT KEY 3/16 X 1 #01A8C8

Old Part Numbers: PM004904AVFor flywheel.

FILTER COVER FRONT #01AEA0

Front air filter cover. Uses element ST163100AV. Use VH901700AV to replace entire assby.

Cap Screw #01B03E

M8 X 150.

Oil Dipstick with Filter Breather Assembly Grey #01A8D8

Old Part Numbers: VT041703AJ, VT041703AVNote: Dipstick model for 'push in' type crankcase.

OIL SIGHT GLASS/GASKET VH3000 #01AA8B

Order this sight glass if you have the threaded oil breather!

Filter Element #01AE9C

Element only for older WL003701AV 2 piece style air filter assembly.

90 DEG PUSH FIT #01A9BA

New Pump with Flywheel #01AFAF

Old Part Numbers: VT482200AJ, VT480000KB, VT480000AV, VT481400AJ, VT470200KBHas a 38mm stroke. Used on 120V Electric units. Note: New style pump has only one airline coming off of the pump head. Order the CTD1238ADAPTKIT if your old pump...

CHECK VALVE WITH PORT ASSEMBLY VS/VT-PROD SERV #01A96A

Old Part Numbers: CV218401AJ, CV220301AJ, CV221502AJ, CV221502AV

QUAD CYL. GASKET #01B034

GASKET KIT 3851MM PUMP 1 #01B032

SET SCR 1/4-20 X 3/4 #01A976

Old Part Numbers: ST012200AVThese screws are currently out of stock at the manufacturer and can not be purchased. 

Flywheel, 10" A-Section, Machined #01A8F0

Old Part Numbers: PU015900AG, PU015900AJ, PU015900AV10" O.D. x 3/4" I.D.

WASHER PLAIN TYPE A 516N ZINC #01A97E

Old Part Numbers: ST070930AV, AL136000AV

.250 Thumb Screw Brass Drain Cock #01A926

Old Part Numbers: D-1403, D-1401, STD-301, ST030100AVKeep your tank from rusting. Replace this if leaking or will not work. 1/4" Thread & 9/16" Hex D-1401 supersedes to D-1403.

Pressure Gauge, 1/4" MPT #01AA6F

Left-mounted gauge, 250 PSI, 1/4" MPT with 2" diameter face. Note - Order this item for model EX55803VA and others.

Condor Pressure Switch Unloader Valve Kit, 90-degree #01AAC1

Old Part Numbers: CW210000AV, EV1WSICondor unloader valve for MDR21130 and other popular pressure switches. Click here for other unloader valves.Requires 1/4" nylon tubing.

Retaining Ring #01B038

Old Part Numbers: ST070236AV

1/4 UNIVERSAL COUPLER #01AC9F

SET SREW 38-16 X 34 #01A8CE

For flywheel, (standard thread, not metric).

SIGHT GLASS 3/4-14 #01B042

Order this sight glass if you have the "push-in" type oil breather! 3/4-14.

OIL SIGHT GLASS #01B051

Note: order this item for models 4B246C and for pumps that have a threaded oil breather!

Bolt (st076838av) #01B040

Electric Motor, RGB SPL Zhengli #01A992

Old Part Numbers: MC013200AV, MC05502SJ, MC015500AJ, MC015502AJ, MC015502SJ, MC015502IP, MC019800IP, MC019800SJ, MC035601AV, MC027800AJ, MC035601AJ, MC035602SJ, MC018000IPFits model # VT629100 and others. 3450 RPM. See Specs for more info...

Quad Valve Plate Assembly #01A8E6

Old Part Numbers: TQ011300AJ, TQ900400AJ, VT470800AJQuad Valve Plate Assembly. Includes the valve plate with valves installed, upper and lower gaskets ONLY. This replaces part numbers TQ011300AJ, TQ900400AJ, and VT470800AJ. Torque to 200 in/lbs. Poor...

5/16-18 SPINLOCK NUT #01A980

Old Part Numbers: ST146000AV

Cylinder Head ASSY #01B03C

Old Part Numbers: VT040400AG, VT040400AJ Bare head/cylinder for pump.

Piston Service Kit #01A8BC

Old Part Numbers: VT-55, VT005501AGReplace this if the rings do not rotate freely in their grooves. Note: Kit does not include rings

VT Piston Ring Set #01A8F6

Old Part Numbers: 1R398, TQ900700AJThis kit will NOT fit pumps with 3" Piston! For v-twin pumps, order qty. 2 for a complete ring set! Includes rings for both pistons. This kit contains two different style rings. Install rings that match the ones being...

Gasket-inlet #01A8EA

Fits between head and filter assby. (old style)

SELF TAPPING SCREW SET (6 PK) #01A94E

Old Part Numbers: ST074415AV, ST120200AV, ST073236AVIncludes six (6) screws.

Oil Seal-vs/vt #01A8E0

Connecting Rod, MACHINING #01B036

For all VT4700 and VT4800 pumps. Replace this if broken or frozen to crankshaft. If frozen to crank, remove, then polish crank and install new rod.

PNMTC WHL 10 CNTRD GREY HUB WHEEL #01ABA7

Wheel - 10 inch.

Piston Pin #01A8BA

Condor Clamp Strain Relief Screw #01A92A

Screw #01AAE5

Nylon Tube, 1/4" OD #05BFE1

Old Part Numbers: 079027007017Use this nylon tube if your pressure switch has a plastic unloader valve with a quick-connect fitting. Note: sold by the foot (qty. 1 = 1 ft of tubing).

Quick Release #022BD5

1/8" NPT x 1/4" nylon tube. This allows 1/4" nylon tubing to push to fit into this fitting. The 1/8" MPT threads screw into the unloader area of the check valve.