Air compressor compression ring, pre-formed. Note: After you install the ring on the piston rod, install the rod in the cylinder by inserting the rod from the top of the cylinder and pull it down. Do not push the rod into the...

Old Part Numbers: SSF-3158-1This is the screw that holds down the piston cover, on the top of the piston.

Order this if ordering valve plate or a new head.

Screw for the pump cooling fan.

Plastic fan to cool pump and motor. 6" outside diameter.Specifications Length: 5" Width: 5" Height: 1.850"

Must order quantity of 4 for complete set. 1/4"-20 x 1-1/4 length.

Old Part Numbers: Z-AC-0032, AC-0032Valve plate comes with preinstalled valves and o-rings. Poor performance or air leaks out of the intake filter while the unit is running? This is probably the problem.

Old Part Numbers: AC-0037, ACG-26Pump head 3/8" FPT filter port and 3/8" outlet portSpecificationsThis head has 3/8" FPT threaded ports on both sides. If your head has a 3/8" port 90° from the air filter, you will need to take a 9/16" drill bit,...