Old Part Numbers: 019-0052Felt air intake filter for Sanborn 130/165 style air compressor pumps. Order 2 or 3 for spares. Replace this every 3-4 months if the compressor is used frequently. A clean...

Old Part Numbers: 040-0311165 Air Compressor Pump with felt air filter to replace the original pump. For 5 to 6.5 HP units. Flywheel NOT included. Swap out your old flywheel or order a new flywheel,...

Old Part Numbers: 058-00073/8" OD compression nut and sleeve (ferrule) for the air compressor transfer tube.

Adjustable air regulator assembly for air compressor units that have a 4-port pressure switch. 1/4" FPT inlet/outlet, 1/8" FPT port for pressure gauge (to maximize performance, we recommend including...

Coleman Powermate 130/165 Air Compressor Pump Valve Plate Kit includes the valve plate assembly with preinstalled valves, head gasket, and cylinder gasket. If air leaks out of the intake filter or if...

Air compressor check valve. 3/8" Comp x 1/2" MPT with 1/8" FPT side port.  The check valve is a one-way valve that prevents air from back-feeding from the air tank. If your unit has a hard time...

Old Part Numbers: 68-6-41/4" NPT x 3/8" OD compression adapter for air compressors. If your pump has an 'X' in front of the serial number and your supply tube measures 3/8" OD, order this part.

Old Part Numbers: 034-0184The Condor 12AC2FAKH OEM pressure switch replacement is an MDR12 style, 4-port, 1/4" female NPT pressure switch with manual on/off switch and 90-degree push-connect style...

Old Part Numbers: 68-8-4, 624318Compression adapter for air compressors. 1/2" compression x 1/4" male NPT.Specifications 1/2" OD x 1/4" MIP

Old Part Numbers: GA0125200, PG0125200BKAir Compressor Pressure Gauge, 1/8" MPT, Back-Mount, 200 PSI, 1.5" Face. Replace if misreading or broken.Specifications PSI: 0-200 PSI MPT: 1/8" MPT Dial /...

Includes Valve Plate Assembly with both gaskets and two (2) felt filters. Restore compression and keep your new valves in good shape with this convenient kit. Poor performance or does air leak out of...

Old Part Numbers: E10818512" OD Flywheel for the 130/165, 753H/755H, 040-0352, 040-0354, 040-0429, and 040-0430 model air compressor pumps. NOTE: The old pump used a 10" OD flywheel, which is now...

Old Part Numbers: GA016300AV, GA016310AV, GA016303AV, GA016308AV, GA016313AVPressure Gauge. 0-300 PSI, 1/8" NPT, Right-mount, 1.625" face. Use Teflon tape on the threads when installing.

Old Part Numbers: 040-0426RPFor 5 to 6.5 HP units. 165 Air Compressor Pump with felt air filter to replace the original pump. Flywheel INCLUDED. Simply install the belt and discharge tube, add oil,...

Old Part Numbers: FS-10-052Twist-lock air filter assembly for air compressors. 1/2" MPT. Includes 10-SOL filter element. Replacing the pump's air filter regularly is important to maintain the...

Air filter for air compressor with universal filter style with 1/2" mounting threads and includes replaceable air filter element.

Old Part Numbers: 145-0313Transfer tube for units that used a 3/8" OD tube only. Replace if bent or leaking (order compression and sleeves also).

Old Part Numbers: ST070191AV-MATO-ring for the main air tank bushing on an air compressor (where the drain valve is).

Old Part Numbers: S118-0032Metal Filter Screen for the 130/165 Coleman Powermate/Sanborn style pumps.

Includes all gaskets to rebuild the pump: head gasket, cylinder gasket, oil pan gasket, and bearing carrier gasket. If the compressor pump doesn't seem to pressurize as quickly as it should or is...

1-1/2" NPSM x 1/4" NPT Bushing Reducer. NOTE: Also order the 513-0002 o-ring seal to complete the repair.

1/8" male NPT x 1/8" Hose Barb Elbow Fitting.

Old Part Numbers: 034-0137, 034-0138, 034-0165 The 034-0197 Pressure Switch replaces the OEM 034-0137, 034-0138 & 034-0165 Pressure Switches. 4-port, 100/130 PSI.

Old Part Numbers: 165-0055Overhaul kit for the 130/165 air compressor pumps. Includes new style valve plate assembly with preinstalled valves, gaskets, piston rings, and felt air filter.  If you have...

Hubcap for wheel, 1/2". Two required.

Old Part Numbers: 136-0069, SRV250145, 1229W-145Air compressor safety relief valve. If your valve leaks below the pressure listed on the side of the valve, replace this vital safety feature...

Oil Seal for the 130/165 series pumps (flywheel side). Replace when removing the crankshaft, bearings, or if leaking.

Old Part Numbers: 145-0388 Connects between switch and check valve in tank.

Old Part Numbers: 034-0134, 034-0136100 PSI on/130 PSI off. Includes Unloader Valve (order item 6 if leaking). If your pressure switch is constantly leaking out of the small bleeder valve on the side...

Isolator Pad (foot). Two are required.

Old Part Numbers: 160-0129New OEM replacement electric motor for various air compressor brands like Craftsman, Porter Cable, Kobalt, Industrial Air, and others. Note: item is listed with "RHP"...

1/4" male NPT x 2" black pipe nipple for air compressors.

Connecting Rod for 5 HP and greater for 165 pump. Torque 160-200 in. lbs.

Complete Piston ng Set (for both pistons) for the 130/165 in-line, twin-cylinder pump. Note: Stagger ring gaps and hone cylinders when installing new rings.

Only available in the 125-0151KIT.

1/4" body x 1/4" male NPT Industrial Steel Coupler for air compressors.

If replacing crank or rings, replace this gasket. (8 bolt style)

Valve plate gasket kit for air compressors. Includes (1) 046-0151 Head Gasket and (1) 046-0152 Cylinder Gasket. We always recommend replacing all head gaskets at the same time, as the other gaskets...

Only available in the 125-0151KIT.

14/3 heavy duty power cord.

Old Part Numbers: 4L520Air compressor v-belt, 4L520. Replace if frayed or slipping.Specifications A-type belt, 1/2" wide Outside Dimension: 52" "A" Belt Conversion: A50

Old Part Numbers: 146-00255 mm key to keep flywheel from slipping.

Piston for 130 & 165 pump. Includes wrist pin and two retainers.

Flywheel end bearing.

Old Part Numbers: CW000800AV, 69DJAAir compressor bleeder (unloader) valve. Replace if broken, but replace the check valve if this constantly leaks after the compressor shuts off.

Roller bearing. (Older pumps had obsolete bronze bushing, order new pump if damaged)

Screw for strain relief.

#8 hollow filter for older Sanborn pumps (old wing nut style)(ea.) 2.25" Width & 2.25" Height Protect your pump from damage by keeping clean or replacing.

Keeps cord tight in switch box.

Connecting Rod up to 4.5HP for 130 pump. Torque 160-200 in. lbs.

Keeps your unit from slipping out of your hands.

Old Part Numbers: 045-0043Bearing carrier and bearing for flywheel end..

Old Part Numbers: 026-0188

For 14 bolt pattern.

Nut, 5/16-18 Serrated nut

Replace if cracked. Order gasket also.