Old Part Numbers: ST067300AV, HF004500AVThis Ferrule is placed inside a compression nut to help stop air leaks. Genuine OEM replacement part.

Old Part Numbers: 072-0006Replace this air compressor drain valve if leaking or will not work. Prevent rust from ruining your tank by draining your tank daily. Keep an extra around for a spare. This...

Old Part Numbers: SRV250140Air compressor safety relief valve, 1/4" MPT, 140 PSI. If your valve leaks below the pressure listed on the side of the valve, replace this vital safety feature...

Old Part Numbers: 61-8

Adjustable air regulator assembly for air compressor units that have a 4-port pressure switch. 1/4" FPT inlet/outlet, 1/8" FPT port for pressure gauge (to maximize performance, we recommend including...

Old Part Numbers: 154-4L500Air compressor v-belt, 4L500. Replace if frayed or slipping.Specifications A-type belt, 1/2" wide Outside Dimension: 50" "A" Belt Conversion: A48

Old Part Numbers: AB-9053138, AB-9050373, ST070324AV, 90503731/4" MPT x 1.5" steel pipe nipple. Be sure to apply plumber's tape on the threads before installation.

Old Part Numbers: CV221502AJ, CV221502SJ, CTD1212QR1/2" Compression x 1/2" MPT air compressor check valve with quick-release fitting for unloader/bleeder tube. The check valve is a one-way valve that...

Old Part Numbers: 68-8-6Air compressor compression adapter, 1/2" compression x 3/8" MPT, no lead. Use this to attached the discharge tube to the pump's discharge outlet.

Old Part Numbers: GA016300AV, GA016310AV, GA016303AV, GA016308AV, GA016313AVPressure Gauge. 0-300 PSI, 1/8" NPT, Right-mount, 1.625" face. Use Teflon tape on the threads when installing.

Old Part Numbers: PU015900AG, PU015900AJ, PU015900AVCast-iron replacement air compressor flywheel, 10" O.D. x 3/4" I.D. Includes the set screw and key.Specifications 3/16" keyway 1/2" 4L, "A"-section...

Plastite screw, 5/8" long. Screw for the plastic shroud, belt guard, etc. Note: Also used on models WL650103, WL651900, WL650703, WL651004, WL651000AJ.Specifications5/8" long

Old Part Numbers: PM004904AVKey for Flywheel, 3/16" x 1" length. Replace this if missing to keep your flywheel securely on the pump shaft.

Old Part Numbers: 31551/4" MPT to 1/8" FPT bushing adapter. If you need a 1/4" MPT fitting, but the part you have is only 1/8" MPT, then use this bushing adapter.

Old Part Numbers: ST119301AV, QR1/8" NPT x 1/4" nylon tube. This allows 1/4" nylon tubing to push to fit into this fitting. The 1/8" MPT threads screw into the unloader area of the air compressor...

Old Part Numbers: CW207576AVPressure Switch replacement, 100/125 PSI, 4-port, on/off switch with unloader valve. Replace the pressure switch if the compressor no longer cuts in or cuts out at the...

Old Part Numbers: HL001800BH, VS001000AV, HL001801BHHandle for the air compressor tank.

Old Part Numbers: ST074415AV, ST120200AV, ST073236AVIncludes six (6) screws.

Old Part Numbers: WA-25, WA002500AV, WA003900AV, WA002400AV, WA002401AVOrder hubcap also if needed. For WL611700AJ Compressor. For WL611800 Compressor and others. NOTE! In June 2000, the manufacturer...

Old Part Numbers: STD-3353/8"-16 flange nut. Also used on models VT627000, VT629100, VT618202 and VT622001.

Old Part Numbers: ST042400AVTapping Screw, 10-24 x 5/8". This is the screw that fastens the belt guard halves, and fastens it to the compressor. Used on model VT634500 and others.

Old Part Numbers: STD-334Axle Bolt for the wheel (order two if you need the bolt for two wheels). Note: Also used on models VT627000, VT629100, VT618202, and VT622001.

9”,  1/4" PTFE TUBE, .062 WALL Unloader tube

Cap for Oil Drain Extension

Old Part Numbers: ZV007005SJ, BG217902AV, BG313200AV, BG217800AV, VT551953AVFront and back belt guard assembly. Includes hardware to install it. NOTE: This is now a kit made of heavy duty wire.

Old Part Numbers: ST022300AV, STD-2231/8" male NPT pipe plug. Used to plug accessory threads in the air compressor manifold, regulator, pressure switch (etc.).

For 120/240 volt models.

Old Part Numbers: CW000800AV, 69DJAAir compressor bleeder (unloader) valve. Replace if broken, but replace the check valve if this constantly leaks after the compressor shuts off.