Old Part Numbers: D21929, Z-D21929Pressure Gauge for air compressors.Specifications 0-240 PSI 1/4" MPT Back-Mount 2.1" Face

Old Part Numbers: AB-9053138, AB-9050373, ST070324AV, 90503731/4" MPT x 1.5" steel pipe nipple. Be sure to apply plumber's tape on the threads before installation.

Order this if ordering valve plate or a new head.

Old Part Numbers: SRV250175, 1229O-175Air compressor safety relief valve, 1/4" MPT, 175 PSI, ASME. If your valve leaks below the pressure listed on the side of the valve, replace this vital safety...

Old Part Numbers: N021229Air Compressor Piston / Cylinder Kit includes the Piston / Rod Assembly with bearing, cylinder cup, and O-rings for model D55127 type 3 and others. This kit is used on many...

Rubber o-ring for air compressors, .362ID x .103W. This is the o-ring seal for the pump end of the outlet tube.

Screw (fastener) for the motor/pump shroud.

1/2" compression nut and sleeve, brass.

Air compressor regulator repair kit includes the plug with ring, o-ring, spring, piston with seal, disk with o-rings, and seal lube with instructions. Used on many brands from Craftsman to DeVilbiss...

Replacement Air Filter Element for Twist-Lock Air Filter Assembly for air compressors. Filter element only (diameter is 2-3/8" and height is 1"). Replacing the pump's air filter regularly is...

Old Part Numbers: AB-ACG18Saddle mount cup for the motor/pump feet. This installs on the mounting feet of the motor/pump assembly and keeps it from vibrating, as well as reducing noise.

Heavy duty 14-gauge power cord ST rated with moulded strain relief, 9/16" OD with terminals. For high-amp motors such as portable air compressors. 

Keep your pump running cool by replacing the fan if any fins are missing or damaged.

Poor performance or air leaks out of the intake filter while the unit is running? The valve plate assembly is probably the problem.

Old Part Numbers: D24345, WL011900AVAir compressor air filter assembly with the element. 3/8" NPT, plastic nipple. The interior paper element is not available separately. Click here to upgrade to a...

1/4" male NPT x 1/8" female NPT brass bushing reducer for air compressors.

Rubber Foot. Click Here to find a replacement rubber foot.

Old Part Numbers: ST070387AV-MAT1/4"-18 NPT x 2.5" long pipe nipple for air compressors. Don't forget to apply plumbers' (teflon) tape to the threads for a tight seal.Extra DetailsIf you have a...

Old Part Numbers: D20675, AC80-BQuick-connect coupler, 1/4" male NPT x 1/4" body.

Screw that fastens the front and back of the belt  guard to each other, and to the compressor base. THD FORMING

Old Part Numbers: 5130940-00, SSF-8080-ZNFlange nut to attach the wheel to the air tank.

For model D55167 type 2 & 3 and others.

Cylinder sleeve for pump. For model D55127 type 1 & 2 and others. Usually replaced with the piston compression ring.

Old Part Numbers: A12210Replace your air compressor drive belt if it is frayed or loose. Replaces the A12210.  Specifications Overall Length: 30-1/2" Half Length: 15-1/4" Width: 5/8" Thickness...

Isolator for the pump/motor assembly. Keep your pump running smoothly and replace if damaged or missing!

Old Part Numbers: SSF-993 Also available in Fastener Kit # KK-4929.