Old Part Numbers: SRV250140Air compressor safety relief valve, 1/4" MPT, 140 PSI. If your valve leaks below the pressure listed on the side of the valve, replace this vital safety feature...

Air compressor gasket includes valve plate gaskets, cylinder gasket, and crankcase gasket. Fits models by Craftsman, Husky, Coleman Powermate, and others. If the compressor pump doesn't seem to...

Element only for air compressor air filter assembly. Also offered is the E100Kit, which includes the filter element, oil sight glass, and crankcase breather. Replacing the pump's air filter regularly...

Oil breather and oil cap, includes o-ring seal. This allows the pump crankcase to breathe, as well as to keep the oil from splashing out.

Old Part Numbers: E101805Rubber Isolator Foot. Keep your air compressor from walking away and reduce excess vibration.

Old Part Numbers: E100059Adjustable air compressor air pressure knob assembly (pressure gauge sold separately). If air leaks from the regulator, or when you turn the knob it doesn't adjust the PSI up...

Old Part Numbers: E100088, E100078Air Compressor Pump Oil Sight Gauge Kit includes the oil sight gauge and seal. Replace this if it's cracked or cloudy to maintain your oil at a safe level.

This air compressor reed valve set contains TWO reed valves. Replace if damaged or if the compressor isn't pressurizing as quickly as it used to. The reed valves go next to the valve plate and help...

Air Compressor Pump Piston Rod Kit includes the piston with rings installed, connecting rod, and eccentric bearing assembly. Also order the gasket kit when ordering this item.

This E100435 air compressor air filter kit includes an air filter element, crankcase oil breather cap, and oil sight glass.

Old Part Numbers: E100093Back-Mount Pressure Gauge for the air regulator, 200 PSI, 1.5" face. Replace if cracked, leaking, or if not reading PSI accurately.

Includes a complete Gasket Kit and two (2) Reed Valves. If air leaks out of the intake filter or if the compressor just isn't performing like it should, order this kit. A loss of pressure or slow...

Old Part Numbers: E103867Pump head.

Order if frayed or missing ground blade. 16/3 X 6', ST

Bare Cylinder for pump. ID 42MM X H 65MM

Cuts in at 95psi - Cuts out at 125psi 4 Port 24amp 120vac / 12amp 240vac 1/4"  unloader valve. Craftsman , Powermate, Sanborn.

Plastic