Old Part Numbers: Z-AC-0032, AC-0032Valve plate comes with preinstalled valves and o-rings. Poor performance or air leaks out of the intake filter while the unit is running? This is probably the...

Old Part Numbers: K0058, K-0058, K0650, K-0650 Sears 919.16014, 91604, K-0650Compression ring replacement kit includes the cylinder, piston ring, retaining screw, o-ring, and head o-ring. Restores...

There are several different air compressor cooling fan styles. Choose this if yours looks like this one. Replace if cracked or missing fins.

Air compressor check valve. 3/8" Comp x 1/2" MPT with 1/8" FPT side port.  The check valve is a one-way valve that prevents air from back-feeding from the air tank. If your unit has a hard time...

O-ring Seal for the discharge (outlet) tube to the pump head.

Old Part Numbers: GA0125200, PG0125200BKAir Compressor Pressure Gauge, 1/8" MPT, Back-Mount, 200 PSI, 1.5" Face. Replace if misreading or broken.Specifications PSI: 0-200 PSI MPT: 1/8" MPT Dial /...

O-ring seal for air compressor valve plate, installs in between the cylinder and valve plate. Used with origina

Old Part Numbers: 5130038-00, 5130024-001/4" OD brass compression nut and sleeve for bleeder (unloader) tube for air compressors.

Must order quantity of 4 for complete set. 1/4"-20 x 1-1/4 length.

Order this if ordering valve plate or a new head.

Old Part Numbers: SRV250150Air compressor safety relief valve, 1/4" MPT, 150 PSI, ASME. If your valve leaks below the pressure listed on the side of the valve, replace this vital safety feature...

Brass compression nut and sleeve for 3/8" OD tubes.

New style filter assembly with 3/8" threads. Includes new style air filter, head, and o-ring. Note: Do NOT order if your head has 2 holes on the SAME side of the head. This head has 3/8" FPT threaded...

Air compressor regulator repair kit includes the plug with ring, o-ring, spring, piston with seal, disk with o-rings, and seal lube with instructions. Used on many brands from Craftsman to DeVilbiss...

Hex Nut for the pump head. The discharge tube attaches to this part. Order the required AC-0781 O-ring Seal as well if needed.

Old Part Numbers: AB-ACG18Saddle mount cup for the motor/pump feet. This installs on the mounting feet of the motor/pump assembly and keeps it from vibrating, as well as reducing noise.

Screw to bolt the fan to the motor, .250-20 x .750 U.

Heavy duty 14-gauge power cord ST rated with moulded strain relief, 9/16" OD with terminals. For high-amp motors such as portable air compressors. 

Old Part Numbers: D20763, D27254, D206434-Port OEM Air Regulator. The Regulator controls the amount of air to your hose. Replace this if you're not able to adjust the PSI to your hose or if it leaks...

1/4" male NPT x 1/8" female NPT brass bushing reducer for air compressors.

Rubber Foot. Click Here to find a replacement rubber foot.

Old Part Numbers: D20675, AC80-BQuick-connect coupler, 1/4" male NPT x 1/4" body.

Screw that fastens the front and back of the belt  guard to each other, and to the compressor base. THD FORMING

Plastic shroud (cover) Screw, #10-9 x .500 Thd. 

Old Part Numbers: 5130940-00, SSF-8080-ZNFlange nut to attach the wheel to the air tank.

Screw to fasten the handle to the compressor base.

Old Part Numbers: SSF-3158-1This is the screw that holds down the piston cover, on the top of the piston.

Screw for the eccentric bearing assembly on crankshaft.

Old Part Numbers: Z-D26611If your valve is leaking on the side of the switch, do not order this part. Order check valve instead. 4 Port,120V Single Pole Switch Cuts in at 105psi - Cuts out at 135psi<

Isolator for the pump/motor assembly. Keep your pump running smoothly and replace if damaged or missing!