Old Part Numbers: 072-0006Replace this air compressor drain valve if leaking or will not work. Prevent rust from ruining your tank by draining your tank daily. Keep an extra around for a spare. This valve is designed for bubble-tight sealing for small...

Old Part Numbers: NTB14Use this nylon tube if your air compressor pressure switch has a plastic unloader valve with a quick-connect fitting. Note: sold by the foot (quantity of 1 = 1 foot or 12 inches of tubing).

Old Part Numbers: SRV250175, 1229O-175Air compressor safety relief valve, 1/4" MPT, 175 PSI, ASME. If your valve leaks below the pressure listed on the side of the valve, replace this vital safety feature.Specifications MPT Inlet: 1/4 in. FPT Outlet: 3/8...

The relief valve is located on the side of the air compressor's pressure switch. If your relief valve is attached to your switch by inserting through a hole on the side bracket, then this is your style. Order this if your valve is broken. If this valve...

Original OEM SquareD replacement Pressure Swtich. Features a 1/4" Male NPT Manifold, 1/4" Compression Unloader Valve, Manual On/Off Lever Switch, and a pressure setting of 105/135 PSI. Replace the pressure switch if the compressor no longer cuts in or...

Universal Regulator: 4-port, two 1/4" FPT ports, and two 1/8" FPT ports (gauges sold separately here). The regulator controls the amount of air in your air compressor hose. Replace this if you're not able to adjust the PSI to your hose or if it leaks...

Keep your tank from vibrating. Good idea to keep extra on hand! 3/4" Height, 1 1/8" Diameter

Old Part Numbers: SU3This cold start valve allows easier starting and lowers amp draw by releasing a portion of the air upon initial start-up, and usually seals off by 20-25 PSI.Specifications 1/8" Male NPT