Old Part Numbers: Z-AC-0032, AC-0032Valve plate comes with preinstalled valves and o-rings. Poor performance or air leaks out of the intake filter while the unit is running? This is probably the...

1/4" Ball Valve Drain Cock for air compressors. Keep your tank from rusting. Replace this if it is leaking or will not work.

Plastic fan to cool pump and motor. 6" outside diameter.Specifications Length: 5" Width: 5" Height: 1.850"

Head Gasket

O-ring seal for air compressor valve plate, installs in between the cylinder and valve plate. Used with origina

Old Part Numbers: 5130038-00, 5130024-001/4" OD brass compression nut and sleeve for bleeder (unloader) tube for air compressors.

Order this if ordering valve plate or a new head.

Brass compression nut and sleeve for 3/8" OD tubes.

Air filter for air compressor with universal filter style with 1/2" mounting threads and includes replaceable air filter element.

Rubber o-ring for air compressors, .362ID x .103W. This is the o-ring seal for the pump end of the outlet tube.

Air compressor regulator repair kit includes the plug with ring, o-ring, spring, piston with seal, disk with o-rings, and seal lube with instructions. Used on many brands from Craftsman to DeVilbiss...

Isolator for pump base. Keep your compressor from damage by replacing these isolators if missing or damaged.

Hex Nut for the pump head. The discharge tube attaches to this part. Order the required AC-0781 O-ring Seal as well if needed.

Old Part Numbers: AB-ACG18Saddle mount cup for the motor/pump feet. This installs on the mounting feet of the motor/pump assembly and keeps it from vibrating, as well as reducing noise.

Old Part Numbers: D20675, AC80-BQuick-connect coupler, 1/4" male NPT x 1/4" body.

Screw that fastens the front and back of the belt  guard to each other, and to the compressor base. THD FORMING

Screw, .250-20 x 1.25" U. This is one of the screws for the pump head; also used to attach the saddle mount cup/foot to the base of the pump.

Old Part Numbers: SST-108, A14785Rubber air compressor isolators with screws, three (3) included.

Old Part Numbers: SSF-3158-1This is the screw that holds down the piston cover, on the top of the piston.

Old Part Numbers: N028208SV, A18886Complete Regulator Manifold Assembly. Includes: Manifold, Regulator, Pressure Gauges, and Couplers.

Old Part Numbers: 5130032-00For model D55167 type 2 & 3 and others.

Old Part Numbers: SSP-9013, 5130039-00Brass insert for nylon tubing that stiffens the end of the tube. For model D55167 type 1 and others.

For model D55167 type 2 & 3 and others.

Old Part Numbers: A16612, 5130066-00

1.25 OD 18

Old Part Numbers: A13969, 5130062-00, N000231

Old Part Numbers: 5130969-00

Old Part Numbers: 5130060-00

Old Part Numbers: Z-GA-370300PSI,2IN,1/4NPT,BK

Old Part Numbers: 5130055-00If your pressure switch is leaking out of the small bleeder valve on the side or if located underneath, order a tank check valve instead, your pressure switch is ok.

Old Part Numbers: SSF-993 Also available in Fastener Kit # KK-4929.