Old Part Numbers: KK-4930, KK-4949Order this kit if replacing the N017592SV Valve Plate Assembly. Used on many Craftsman, DeVilbiss, DeWalt, and other units. If the compressor pump doesn't seem to...

Old Part Numbers: Z-A08548, Z-D29777Valve Plate Assembly, includes Valves and Cylinder Gasket (Head Gasket sold separately). Genuine Porter Cable replacement part. Broken valve causing slow pump up...

Replace this Tube Seal when replacing the Piston/Cylinder Kit, and if air is leaking from the head at the outlet.

Old Part Numbers: KK-4964Includes piston / rod assembly with piston ring, cylinder, and rod bearing.  If you have a sudden loss of performance, replacing the cylinder sleeve and piston ring usually...

Old Part Numbers: CAC-1199Replace this when replacing the piston/cylinder. Since the gasket is graphite, it cannot be reused if the head is removed. NOTE: Used with NEW-style valve plate.

Universal Regulator: 4-port, two 1/4" FPT ports, and two 1/8" FPT ports (gauges sold separately here). The regulator controls the amount of air in your air compressor hose. Replace this if you're not...

Old Part Numbers: SRV187150, SRV187-1/8Air compressor safety valve, 150 PSI, 1/8" male NPT. If your valve leaks below the pressure listed on the side of the valve, replace this vital safety feature.

Bare pump Head (no gaskets or seals included). Torque head bolts down to 52 in/lbs.

Screw for the pump head. NOTE: Torque head bolts down to 52 in/lbs.

Old Part Numbers: CAC-1213Isolator for the pump. Keeps the pump from vibrating against the plastic shroud.

Old Part Numbers: SSF-3147Part of piston/connecting rod kit.

Plastic shroud (cover) Screw, #10-9 x .500 Thd. 

Old Part Numbers: 5130940-00, SSF-8080-ZNFlange nut to attach the wheel to the air tank.

Replace your worn or broken belt.

Old Part Numbers: SST-108, A14785Rubber air compressor isolators with screws, three (3) included.

Old Part Numbers: SSF-993 Also available in Fastener Kit # KK-4929.