Old Part Numbers: 048-0105Complete piston/cylinder kit with piston ring and o-ring seals for DeWalt and Coleman Powermate air compressor pumps. NOTE! For Coleman Powermate branded units, order this...

Old Part Numbers: SRV250140Air compressor safety relief valve, 1/4" MPT, 140 PSI. If your valve leaks below the pressure listed on the side of the valve, replace this vital safety feature...

Old Part Numbers: 058-00073/8" OD compression nut and sleeve (ferrule) for the air compressor transfer tube.

Adjustable air regulator assembly for air compressor units that have a 4-port pressure switch. 1/4" FPT inlet/outlet, 1/8" FPT port for pressure gauge (to maximize performance, we recommend including...

Air compressor check valve. 3/8" Comp x 1/2" MPT with 1/8" FPT side port.  The check valve is a one-way valve that prevents air from back-feeding from the air tank. If your unit has a hard time...

Foam air intake filter for air compressors. Replacing the pump's air filter regularly is important to maintain the performance and longevity of your air compressor. A clean filter element prevents...

Screen for an air compressor's air intake filter.

Air compressor valve plate assembly. Includes valve plate with preinstalled valves, head & cylinder o-ring seals. Broken valve causing slow pump-up or no compression at all? Replace this valve plate...

Old Part Numbers: PG0250300BTBottom-mount, 1/4" MPT, 300 PSI air compressor pressure gauge.Specifications NPT: 1/4" Dial / Face: 2" PSI: 300 PSI Bottom-Mount 

Air compressor o-ring gasket that installs in between the cylinder cup and the valve plate. NOTE: This gasket does not go on the piston.

Fan, squirrel cage style. Does not include the bolt or washer. Keeps your pump cool so be sure to replace it if it's missing blades! Diameter: 5-1/8" Depth: 1-3/8" Fan Blades: 43

Rubber grommet for air compressor pump/motor assembly. Keeps your motor stable and reduces vibration.

Head O-ring Gasket for the pump. This is the gasket directly under the head and on top of the valve plate.

1-1/2" NPSM x 1/4" NPT Bushing Reducer. NOTE: Also order the 513-0002 o-ring seal to complete the repair.

1/8" male NPT x 1/8" Hose Barb Elbow Fitting.

Old Part Numbers: 032-0001, 032-0056Replacement Pressure Gauge, 1/8" male NPT, 300 PSI, back-mounted thread, 1.7" face. A working, accurate pressure gauge is crucial for correct operation of the...

Hubcap for wheel, 1/2". Two required.

Old Part Numbers: 145-0405Air compressor transfer tube for 15-gallon units. Replace if bent or kinked. 3/8"  Tube For the compression nut, see part # 11623ASpecificationsLength: 9.83" long if...

Old Part Numbers: 145-0388 Connects between switch and check valve in tank.

Plastic tube for the air compressor air intake filter (does not include air filter).

14/3 heavy duty power cord.

1/4-20 x 2-3/4"

1/4"

Old Part Numbers: CW000800AV, 69DJAAir compressor bleeder (unloader) valve. Replace if broken, but replace the check valve if this constantly leaks after the compressor shuts off.

1/4-20 x 3/4"

Screw for strain relief.

Rubber isolator foot. Reduces vibration and noise.

Old Part Numbers: 112-0031Replacement handle for part # 112-0031.

Keeps cord tight in switch box.

8" wheel for units w/ 15, 20 & 21g tanks.

Old Part Numbers: 040-0327Complete oil-free, direct-drive air compressor pump/motor assembly (less cord) for Coleman Powermate units. Includes the complete OEM single-cylinder, oil-free pump and...

Old Part Numbers: 034-0140