Old Part Numbers: SRV250140Air compressor safety relief valve, 1/4" MPT, 140 PSI. If your valve leaks below the pressure listed on the side of the valve, replace this vital safety feature...

Old Part Numbers: 68-8-6Air compressor compression adapter, 1/2" compression x 3/8" MPT, no lead. Use this to attached the discharge tube to the pump's discharge outlet.

Old Part Numbers: XA-33, XA-34Cylinder Gasket. Note! Do not order this for model number 106.175881, order XA005700AV.

Old Part Numbers: BT-3149" circumference, 6 groove belt. Replace if frayed or slipping.

Old Part Numbers: GA030000AV, A14993, E110954, GA016700AV, GA031000AV, GA015000AVAir Compressor Pressure Gauge. 2" OD Face, 1/4" NPT bottom-mounted thread, 300 PSI gauge. Buy a second one to ensure...

Old Part Numbers: VS-18, 265-25, A00723Intake Flapper Valve. Thickness = .008 If air leaks out of the intake filter or if the compressor just isn't performing like it should, order this kit. A loss...

Foam Filter Element for the pump's intake. Check to see if you need to order 1 or 2. Keep clean and order a few to keep your pump running cleanly and efficiently.

Old Part Numbers: VT-4, VT252901AJ, VT273200AJOrder this kit for older VT pumps using this style gasket kit includes head, valve plate assembly, gaskets, head bolts, and air filter kit.Note 1: The...

Head Plate Gasket for pump. This is the gasket underneath the head plate that covers the exhaust valves.

OEM Cylinder Gasket for older "VT" series Campbell Hausfeld, Speedaire, and Craftsman pumps. NOTE: Confirm your gasket type before ordering. These older "VT" series pumps used one of two gaskets,...

Old Part Numbers: ST074415AV, ST120200AV, ST073236AVIncludes six (6) screws.

Old Part Numbers: XA-32Bearing cap gasket (flywheel side).

Old Part Numbers: VT-1, VT000100AGPlease Note: These new style rods are thinner than the original. The rod will have no movement once the cylinder is in place. Length: 5 7/8"

Thickness .015