C05Z080V2A154 #01AFD6

C05Z080V2A154 #01AFD6

Loading Schematic

Model Numbers: C05Z080V2A154

Repair Parts for the Coleman Powermate model C05Z080V2A154 Stationary Two-Stage Electric Air Compressor

Specifications

B5900 Pump specs:

  • Requirement: a 5HP motor with at least a 7/8" shaft for this pump.
  • Swap out your expensive 2 stage pump with this inexpensive steel sleeved aluminum unit.
  • 18cfm @100psi 16cfm @175psi.
  • 1/2" FPT outlet. Bolt pattern 6.75 in. front to back 7.5 in. side to side.
  • 13.75 in. single belt flywheel.
  • 1-1/4" FPT on aftercooler outlet.
  • Total ht. 16" Min RPM 700 Max RPM 1400 New pump has 1 groove smaller flywheel, but will work just fine. Simply run 1 belt and purchase a smaller belt.

Extra Details

B5900 Torque specs: INCH/POUNDS
  • Head Bolts: 260-370 IN/LBS
  • Intercooler Bolts: 165-240 IN/LBS
  • Air Filter Assembly Bolt: 165-205 IN/LBS
  • Flywheel Bolt: 260-370 IN/LBS

Manuals

Click here to order and download the Owner's Manual

Extras

We have your Coleman Powermate C05Z080V2A154 parts here. Whether you need a pressure switch, air filter, valve plate assembly or a new pump, we have your parts. Coleman Powermate C05Z080V2A154 parts are easy to come by at Master Tool Repair. We have helpful sales team members that can assist you with your repair. We have accessories as well as compressor oil to keep your pump running like a top. We keep the most popular Coleman C05Z080V2A154 parts in stock and we can order most other parts in a matter of a few days. To make ordering easier, we have created the ability for you to order parts by simply enlarging the schematic and then using your mouse to hover over the actual part. You will see the part pop up and are able to order by simply choosing the quantity of parts that you need and adding them to your cart. Make sure to keep spare parts on hand so that your down time will be minimal. Replace your Air Filter and Oil every 3 to 4 months if used frequently. Use straight 30W compressor oil (20W below 34 deg). Drain your tank regularly to prevent rust, especially in humid climates. 

Technical Documents

Standard break-in procedure:

1. Open drain tap

2. Turn on compressor for about 10 to 15 min.

3. Let it cool for 15 to 20 min.

4. Close drain tap.

5. Run air compressor until unit turns off by itself.

6. Ready for use.