California Air Tools Regulator Manifold for air compressors. The regulator controls the amount of air in your air compressor hose. Replace this if you're not able to adjust the PSI to your hose or if it leaks or if there are any fractures in the manifold...

1/4" Ball Valve Drain Cock for air compressors. Keep your tank from rusting. Replace this if it is leaking or will not work.

NOTE! This Filter will only fit 1HP models.  Order part number 90260 for 2HP models - Click here for SKU 90260 Replace periodically to ensure smooth operation of your air compressor.

Old Part Numbers: 90393Air compressor pressure switch assembly. If the compressor doesn't cut in or cut out at the designated PSI, most likely the pressure switch is defective. NOTE: If your pressure switch is constantly leaking out of the small bleeder...

Old Part Numbers: Electromag. Valve 220VFor 220V units.Extra DetailsNOTE! The white plastic thread below may be turned up or down. This is not an error or defect, either one will function perfectly and will install on the unit.

California Air Tools air compressor exhaust hose for 2HP models. Stainless steel braded fluid hose, 3/8" ID.

"T" fitting for the cold start valve. This valve installs into the pump head. The braided discharge tube threads into one end and the cold start valve is installed in the other.

1/4" Quick Connect for California Air Tools air compressors.