close audio
You Are Here: Front Page » Air Compressor Parts: Belts, Filters, Regulators & More » Coleman Powermate Air Compressor Parts | Master Tool Repair » Coleman, Sanborn Pumps & Parts » MSL10 PUMP New Pump (MSL10 Pump) MASTERTOOLREPAIR.COM

MSL10 PUMP $275.83

Coleman, Sanborn Pumps & Parts

Product Details
931.8090-0 - MSL10 PUMP

Found under the following brands: Schulz

New Pump replacement (non-OEM). For most units with only one line coming from pump head. See Extra Details. Does not include air filter assembly 007.0156-0

Click here to view Pump video

The pump compresses air and sends the pressurized air to an air receiver/tank for use. The two types of pumps are reciprocating pumps (by far the most common in construction and residential use) and rotary screw pumps. Many pumps are cast iron but can also be aluminum. In air compressors, there exist oil-free and oil-bath pumps. Oil-free pumps use bearings and a Teflon-coated compression ring and reed valves to produce compression, while oil-bath pumps use standard conrods, pistons and rings with an oil-filled crankcase. Oil-bath pumps are generally longer lasting, quieter and product more CFM/PSI; oil-free pumps don’t require much maintenance and are convenient and portable. A clean air filter and good, proper oil (if applicable) will keep your pump running for years to come.

Select quantity:

Buy 2 or more for 10% off!

Now is the best time to buy in bulk. Not only will you save money on shipping and have a backup in case the part breaks in the future, you'll also save 10% with our special quantity discount.


This item fits the following models:

Air Compressor Pump Parts - 84A, 104A, 112A, 143, 400A, 500A
Air Compressor Parts - EC25E

Product Specifications



  • Single Stage
  • 7.5 cfm @ 90psi
  • Max RPM 950
  • Max pressure 125 psi
  • Cast Iron Construction
  • 2.5" bore
  • HP 2
  • 1-A Belt
  • Bolts up with very minor modification
  • For pumps that have 1 tube coming out of head.
  • Head and valve plate can be rotated as needed
  • Includes flywheel and air filter.
  • 1/2" Inlet - 3/8" Outlet
  • 39 lbs.
  • Oil Capacity .54 oz.
  • Click here for dimensions
  • Click here for full schematic of pump
Extra Details

This pump has a 1/2" NPT hole for the air filter assby. and a 3/8" hole for the supply line.

Click here for tech details on this pump.

Torque specs:

  • Cylinder head  177 in lbs.
  • Cylinder 177 in lbs.
  • Flywheel 177 in lbs.
  • Flange 71 in lbs.
  • Valve Retainer Screws 20 in lbs.

Your question about this product has been received!
Just Arrived!

Needed for every air tool!

Industrial Interchange Connector

Industrial Interchange Connector

$3.52 $1.95

Quickest way to drain your tank!

1/4" Ball Valve Drain Cock

1/4" Ball Valve Drain Cock

$8.64 $6.95

Every shop needs one!



$14.04 $9.95