2.0 HP Continuous-Run Pump / Motor Assembly, Ultra-Quiet, Oil-Free, (100% Duty Cycle) #116769

This California Air Tools Ultra Quiet, Oil-Free, Continuous-Run Air Compressor Motor/Pump Assembly is designed to be one of the quietest pumps/motors in the industry, with only 77 decibels of sound.

You'll get up to 8 hours of continuous running at 90 PSI and 12 hours at 40 PSI.

The 200CR motor/pump is tested for a minimum life of 5,000 hours before wear. Wear parts can be a piston ring, cylinder ring or reed valve.

The powerful 2.0 HP (110V / 60Hz) motor operates at only 1,700 RPM, creating less noise and less wear.

The Oil-Free Dual-Piston Pump System is engineered for high performance and durability.

This motor/pump is tested for a minimum life of 5,000 hours before wear.

• Ultra Quiet: Only 77 decibels
• Oil-Free Pump
  • Cleaner air for better tool operation.
  • Less maintenance and Costs.
  • Thermal Overload Protector
• 125 PSI  Maximum Pressure
• Duty Cycle: 100%
• Air Filter Inlet Ports: 1/2" NPT
• Output Air Port, Elbow: - 3/8" NPT
• 110V / 60 Hz  / Single-Phase
• Low Amp Draw: 7 Amps
• Power Requirements:
  • Dedicated 15 Amp outlet
  • 3,000 Watts (running) Generator minimum
  • Extension Cord: 14-gauge 100-ft cord
  • GFCI: OK
• Maximum Operating (ambient) Temperatures: 0 to 50°C (32 to 122°F)
• Run Capacitor: 45 uF
• Start Capacitor: 110v, 189-227 uF
• Installation Requirement: Unloader and/or Bleeder Valve Required.
• Weight: 37 pounds
• Dimensions (LWH): 12.20" x 8.58" x 13.38"
• Comes complete with Elbow (attached), (2) Air Filters, and (4) Shock Struts
• 1-Year Limited Warranty
• Certification: Pending
• Made in San Diego, California USA

Note: This is NOT an air compressor. This is a replacement motor/pump that can be easily installed into existing California Air Tools equipment (not compatible with Dry Air models). 

Compatible Accessories:

91282 Replacement 2.0 HP Air Filters