Description
The California Air Tools 6 HP Ultra Quiet, Ultra-Dry, Oil-Free Air Compressor with 98% Air Drying System is designed to be one of the industry's quietest 6 HP air compressors, with only 78 decibels of sound. The three powerful 2.0 HP (SP-9421-22060) motors operate at just 1,680 RPM creating less noise and less wear. Designed for the user looking for power, airflow, and less service and maintenance with at least 30% less noise!
The "SP" series of ultra-quiet air compressor motors have been designed to increase duty cycle and allow for longer continuous run times (i.e. may run continuously at 6.0 CFM @ 90 PSI for up to 6 hours at a time, or intermittently at 12.0 CFM @ 90 PSI).
This air compressor has an oil-free, dual-piston pump engineered for high performance and durability and designed to have a life cycle of 3,000+ hours compared to 1,500 hours or less for other comparable air compressors.
The large 20-gallon steel air tank is just the right size for dental practices and milling, manufacturing clean rooms, restaurants/bakeries, and general pneumatics that require clean ultra-dry air.
To dry the air from the air compressor an Aftercooler and 98% Air Dryer are utilized via a highly efficient twin-tower auto-purging system. The Air Dryer is specially designed to remove up to 98% of the water vapor from the air to protect sensitive tools and machinery.
The aftercooler is a heat exchanger for cooling the discharge air from the air compressor. The water vapor from the compressed air is condensed into liquid form and pushed into the 98% Air Dryer.
The easy-to-replace "Spin-On" Air Dryer Cartridges have a regenerating High-Temperature Molecular Sieve Desiccant to dry the air.
This cartridge dryer has an average life of 2-years before replacement.
Specifications
- HP: 6 HP (triple 2 HP motors)
- Decibel Rating: ultra-quiet, only 78 dB
- Pump Type: twin oil-free, direct-drive, twin-cylinder (cleaner air for better tool operation)
- Max PSI: 125 PSI
- CFM Delivery: 16.30 CFM @ 40 PSI / 12.00 CFM @ 90 PSI
- Voltage: 220V/60 Hz/Single-Phase (No 208 Volts - if necessary, obtain 208 to 220 voltage booster)
- Amperage: 24A (operating average 18-20 Amps)
- 30A breaker required
- Time to fill tank from empty to full: 93 Seconds
- Recovery time from 95 PSI to 125 PSI: 32 Seconds
- Duty Cycle: 70/30
- Maximum continuous running 45-60 min. (Depending PSI & CFM)
- Tank Capacity: 20-gallon steel air tank (non-ASME)
- PDP performance range: (-20' F. to -51' F.)
- Air Quality: ISO 8573 - Class 2.3.1
- Weight: 239 pounds
- Dimensions (LxWxH): 44" x 24" x 30"
- Warranty: 1-year limited
Extra Details
- 0.01 Micron Prefilters (2 total)
- Two pressure control gauges
- One female industrial "Push to Connect" quick connectors
- Thermal Overload Protector
- Plug Type: Nema L6-30P
- Maximum continuous running 30-60 min. (depending on PSI & CFM)
- Less heat which dissipates more efficiently
- Comes complete with six (6) air filters
- Air Dryer Cartridge uses two (2) High-Temperature Molecular Sieve Desiccant Towers
- Easy to remove (spin off) and replace every 2 years
- Aftercooler (condenser)
- PDP performance range (-20' F. to -51' F.)
- Air Quality: ISO 8573 - Class 2.3.1
- Cord Length: 7ft
- Commercial Use: refer to state & city codes
- Assembled in USA with global components
Manuals
Click here to download the owner's manual.
Extras
Easy Start Valve Feature:
The Easy Start Valve feature allows for a easier start up using less starting amps. The Easy Start Valve releases a small amount of air from the pump at start up to produce a no-load condition allowing the motor to spin freely. This no-load start up requires less amps for a easier start up in cold temperatures.
Automatic Drain Valve is not required on this model due to high drying efficiency of the Twin-Tower Auto Purge Air Dryer System.