TUBE UNLOADER CENTRIFUGAL CU EQ PMP EQ78 #0583BF

SCREW CAP HEX HD GR5 ST BLK 5/16-18X3/4 #0579E9

SCREW,CAP,HEX HD,GR5,ST,BLK

OIL,PUMP,SYNTHETIC,BLUE,1 GALLON,ESG #057B1C

Old Part Numbers: ESG1 Gallon of Jenny Synthetic Blue Pump Oil.

Wingnut #0577DB

Old Part Numbers: L55Wingnut for old style air filter.

CAP BEARING L PUMP CI 3 HOLES PAINTED L2 #058469

Rebuild Kit #057743

Old Part Numbers: 610-1128Complete Rebuild Kit for EQ, EQU, GT, GTU, and Y pumps. Rebuild Kit includes Rings, Gaskets, Valves and canister style Air Filter Elements for both banks. Order 150-1104 if you have the older, "hockey puck"-style filter elements...

G, GC, MG, L, LC, D, Repair Kit #057718

Old Part Numbers: G101, 610-1124Rebuild Kit for entire pump. Includes Rings, Gaskets, Valves and canister style Air Filter Elements. NOTES: Order L54E if you have hollow, wing nut style filters. Head gasket is for 5 hole style.  Order part # 104-1008 if...

BELT,VEE,A56,4L-580 #057933

Old Part Numbers: 4L-580Replace if frayed or slipping.

PIN COTTER ST BLACK 116DIAX12LG EQ73B #057A15

Old Part Numbers: EQ73B

CRANKCASE G PUMP CI MACHINED Y1A #05847B

PIN PISTON STEEL EQ35 #057771

Old Part Numbers: EQ35High Pressure wrist pin.

KIT ELEMENT FILTER G54E PKG OF 4 G54EP #057A01

Old Part Numbers: G54EPPkg of four G54E Filter Elements. Element only for air filter assembly.

Crankcase Bolt #057753

Old Part Numbers: K14Crankcase bolt (oil fill), K series

UNLOADER CENTRIFICAL PUMP ASSY EQ170 #0577B9

Old Part Numbers: EQ170Weight Assy. for Cent. Unloader.

KIT BASIC REPAIR GTU PUMP GTU101 #0576B6

Old Part Numbers: 610-1129, EQU101, GTU101Rebuild Kit Incl. Rings, Gaskets, Valves, Unloader Valves and Air Filter Elements (L54E hollow style).

KIT FILTER ASSY G154 PKG OF 4 G154P #0583F7

Old Part Numbers: G154PIncludes four G154 Filter Assemblies.

SCREW ROD STEEL WLOCK WASHER 14-20 L22 #057807

Old Part Numbers: L22

Piston Assy w/ Rings #05781B

Old Part Numbers: K132Replace this if the rings do not rotate freely in their grooves. Includes one each of: piston, ring set, bumpers and wrist pin.

Bearing, Crankshaft #0576EE

Old Part Numbers: K9Bearing for crankshaft. Order one for each side.

TUBE UNLOADER HEAD-HEAD CU MGU PUMP LU88 #057A51

Old Part Numbers: LU88Unloader  Tube w/ Fittings

GT Pump #057683

NOTE! This pump currently has a lead time of 18 weeks. See Specs for CFM output. This pump replaces the EQ pump. New pump w/ flywheel & air filter assemblies. Typically used on electric motor-driven units. Has two-groove Flywheel.SpecificationsCFM...

Tube, Operating, Centrifical Unloader #057A0F

Old Part Numbers: EQ71

Right Head, Unload Type #057769

Old Part Numbers: EQ180 Right Head for constant run units (includes unloaders).  Sale item - 2 in stock (no retuns)  For Emglo pumps: Emglo GT, GTU, W, Y, and other model Emglo pumps. 

Oil Seal #0576CC

Old Part Numbers: K11EOil leaking around the shaft? Remove flywheel and replace this seal.

GT Valve Kit #05BF6E

Everything you need for a valve job. Includes, intake, exhaust valves. Even includes necessary gaskets. Torque head bolts to 250 in/lbs.

GTU Valve Kit #05C055

Everything you need for a valve job. Includes, intake, exhaust and unloader valves. Even includes necessary gaskets. Torque head bolts to 250 in/lbs.

TEE RUN BRASS 14TBX14TBX18NPTM #057CFD

Bearing #05773D

Old Part Numbers: L9If loose or dirty, replace these when rebuilding pump.

BOLT STUD HEX ST 516-18X2-14X58 K52-1 #057A99

Old Part Numbers: K52-1

VALVE UNLOADER CENTRIFICAL ASSY EQ174 #0576B4

Old Part Numbers: 120-1170If yours leaks or does not unload the pump to start, try replacing this assembly. Located on the end of your pump. Has a supply line that runs to the head.

PISTON PUMP ALUMINUM MACHINED K32 #057A43

Old Part Numbers: K32 Piston and bumpers (no rings).

Unloader, Centrifugal, Weight, Set #057A0D

Old Part Numbers: EQ70

VALVE,SAFETY,ASME,1/4",200 PSI #057945

Old Part Numbers: SVU200Replace if misreading or broken.

COVER FILTER WDECALS L54 #0581B6

SCREW CAP HEXHD GR5 ST BLK 516-18X2-14 #057A45

INTERCOOLER FINNED WFLARE NUTS ASY EQ65 #0576E8

Old Part Numbers: EQ65Finned intercooler tube w/ flare nuts. (furthest from flywheel)

INTERCOOLER FINNED WFLARE NUTS ASY EQ62 #0576E6

Old Part Numbers: EQ62Finned intercooler tube w/ flare nuts. (closest to flywheel)

VALVE PILOT WHAND UNLOADER 175PSI 14 #057B08

ELBOW MALE COMPRESSION BR 14TBX18 #0577E7

1/4" x 1/8" Compression Elbow. For COPPER tubing. If you are using Nylon or Plastic tubing, consider using our T1059.

BUMPER WRIST PIN PLASTIC K36A #057749

Old Part Numbers: K36AWrist Pin Retainer (Bumper).

Pin, Pivot, Unldr, Cntrfcl, W/ctr Pin #057A13

Old Part Numbers: EQ73

TEE BRANCH BRASS 14 #057781

1/8" MPT x 1/4" compression T

TUBE BREATHER BENT CU MGUGCUGTU L18 #057A3F

Old Part Numbers: L18

Bracket, Filter #0579FF

Old Part Numbers: L53BRACKET,FILTER

Block, Manifold, Zinc, 6 Hole, Tapped, Mc-6 #05779F

Old Part Numbers: 150-1121, MC-5, 150-1122, MC-65-way manifold. Replace if cracked or stripped. Manifold for constant run or start/stop units.

VALVE PLATE, W PUMP, CI, PAINTED, BLUE, #0579F5

Old Part Numbers: W40, 220-1041PLATE,VALVE,W PUMP,CI,MACHINED

PIN PISTON STEEL HARDENED K35 #057747

Old Part Numbers: K35Wrist Pin (Piston Pin) for conrod.

CONTROL IDLE HONDA 8HP ASSY TIC-8HG #057793

Old Part Numbers: TIC-8HGGovernor style to control engine speed for Honda models.

Crankshaft #0576BC

Old Part Numbers: Y20AIf yours is pitted or grooved, replace it. Use new connecting rods.

NUT LOCK FLANGE HEX SERR ST PLTD 516-18 #0578D5

LOCK,FLANGE,HEX,SERR,ST,PLTD,5/16-18

Gasket Set #05767F

Old Part Numbers: L100All the gaskets necessary to rebuild your D, DC, DCU, G, GU, GCU, L, LC, LU, LCU, MG or MGU Pump. (Incl. L3, L4,2-K31,2-L41,2-L51)

ELEMENT FILTER AIR COMPRESSOR JENNY G54E #057A59

Old Part Numbers: G54E