Old Part Numbers: A19715, CAC-4337-1, D288261/2" male NPT x 1/2" compression check valve, with 1/4" compression adapter. For model D55167 type 1 and others. If the small unloader (bleeder) valve on...

Old Part Numbers: CAC-291-1, Z-CAC-291-1Top head gasket.

Old Part Numbers: 5130038-00, 5130024-001/4" OD brass compression nut and sleeve for bleeder (unloader) tube for air compressors.

Old Part Numbers: 9-16279 4-1/2" X 1-1/2" X 9/16"

Must order quantity of 4 for complete set. 1/4"-20 x 1-1/4 length.

1/2" compression nut and sleeve, brass.

Old Part Numbers: SRV187150, SRV187-1/8Air compressor safety valve, 150 PSI, 1/8" male NPT. If your valve leaks below the pressure listed on the side of the valve, replace this vital safety feature.

Plastic plug for the piston pin (two used per piston).

Screw for the pump head. NOTE: Torque head bolts down to 52 in/lbs.

Vent filter for the pump crankcase. This fits into the top of the cylinder.

Old Part Numbers: 68-4-21/8" male NPT x 1/4" compression adapter for air compressor unloader/bleeder line. A very common adapter to attach the 1/4" OD unloader/bleeder line from the unloader valve on...

Replace if pitted or grooved along w/ 2 new rods. -Rods not inlcuded-

Old Part Numbers: 5130940-00, SSF-8080-ZNFlange nut to attach the wheel to the air tank.

Air compressor power cord assembly. 14GA  240VAC Craftsman, DeVilbiss and more

Pin for the piston. One used per piston.

Washer for the flywheel bolt.

Old Part Numbers: CAC-4205, SUDL-402-2Assembly Cord Motor SJT for air compressors.

Old Part Numbers: SUDL-65

.313-18 WING

Old Part Numbers: SSN-56-ZN1 X 11/32 X 1