Old Part Numbers: SRV250140Air compressor safety relief valve, 1/4" MPT, 140 PSI. If your valve leaks below the pressure listed on the side of the valve, replace this vital safety feature...

Old Part Numbers: 058-00073/8" OD compression nut and sleeve (ferrule) for the air compressor transfer tube.

Air compressor check valve. 3/8" Comp x 1/2" MPT with 1/8" FPT side port.  The check valve is a one-way valve that prevents air from back-feeding from the air tank. If your unit has a hard time...

Foam air intake filter for air compressors. Replacing the pump's air filter regularly is important to maintain the performance and longevity of your air compressor. A clean filter element prevents...

Piston/Cylinder rebuild kit for 2 HP Coleman Powermate / Sanborn units. Everything you need to rebuild pressure, including the piston/conrod assembly with compression ring, cylinder sleeve, and head...

Air compressor valve plate assembly. Includes valve plate with preinstalled valves, head & cylinder o-ring seals. Broken valve causing slow pump-up or no compression at all? Replace this valve plate...

Air compressor o-ring gasket that installs in between the cylinder cup and the valve plate. NOTE: This gasket does not go on the piston.

Fan, squirrel cage style. Does not include the bolt or washer. Keeps your pump cool so be sure to replace it if it's missing blades! Diameter: 5-1/8" Depth: 1-3/8" Fan Blades: 43

Old Part Numbers: 60-4-61-4, 058-0017-MAT1/4" compression nut and sleeve. Order two, one for each end of the tube.

Rubber grommet for air compressor pump/motor assembly. Keeps your motor stable and reduces vibration.

Head O-ring Gasket for the pump. This is the gasket directly under the head and on top of the valve plate.

Universal Regulator: 4-port, two 1/4" FPT ports, and two 1/8" FPT ports (gauges sold separately here). The regulator controls the amount of air in your air compressor hose. Replace this if you're not...

Old Part Numbers: 032-0001, 032-0056Replacement Pressure Gauge, 1/8" male NPT, 300 PSI, back-mounted thread, 1.7" face. A working, accurate pressure gauge is crucial for correct operation of the...

CTB1412 hose barb fitting for air compressor in-tank check valve. A hose barb is defined as one or more continuous ridges or bumps on a fitting that are used to grip the inside diameter of a tube and...

Plastic tube for the air compressor air intake filter (does not include air filter).

Front (scroll) Shroud ONLY.

1/4-20 x 2-3/4"

Old Part Numbers: CW000800AV, 69DJAAir compressor bleeder (unloader) valve. Replace if broken, but replace the check valve if this constantly leaks after the compressor shuts off.

1/4"

1/4-20 x 3/4"

Screw for strain relief.

Old Part Numbers: 026-0188

Old Part Numbers: 034-0140