Old Part Numbers: Z-AC-0032, AC-0032Valve plate comes with preinstalled valves and o-rings. Poor performance or air leaks out of the intake filter while the unit is running? This is probably the...

Old Part Numbers: K0058, K-0058, K0650, K-0650 Sears 919.16014, 91604, K-0650Compression ring replacement kit includes the cylinder, piston ring, retaining screw, o-ring, and head o-ring. Restores...

Old Part Numbers: KK-4835, CAC-118, 889124, 889125, 891125, AC-0788, CAC-1118, D25009, D25837, CAC1118, CAC118, CAC-249, CAC-249-1, A02743, K-0651, KK-5081, 889124 889125 891125 AC-0788 CAC-1118...

There are several different air compressor cooling fan styles. Choose this if yours looks like this one. Replace if cracked or missing fins.

Muffler for Single Cylinder units.

Air compressor check valve. 3/8" Comp x 1/2" MPT with 1/8" FPT side port.  The check valve is a one-way valve that prevents air from back-feeding from the air tank. If your unit has a hard time...

O-ring Seal for the discharge (outlet) tube to the pump head.

Old Part Numbers: AC-0037, ACG-26Pump head 3/8" FPT filter port and 3/8" outlet portSpecificationsThis head has 3/8" FPT threaded ports on both sides. If your head has a 3/8" port 90° from the air...

O-ring seal for air compressor valve plate, installs in between the cylinder and valve plate. Used with origina

Old Part Numbers: 5130038-00, 5130024-001/4" OD brass compression nut and sleeve for bleeder (unloader) tube for air compressors.

Must order quantity of 4 for complete set. 1/4"-20 x 1-1/4 length.

Order this if ordering valve plate or a new head.

Brass compression nut and sleeve for 3/8" OD tubes.

This air compressor pump muffler/filter kit includes the filter element and housing. Protect your air compressor pump from damage.

Air compressor compression ring, pre-formed. Note: After you install the ring on the piston rod, install the rod in the cylinder by inserting the rod from the top of the cylinder and pull it down...

Screw (fastener) for the motor/pump shroud.

Old Part Numbers: D26612, Z-D26612OEM Pressure Switch replacement, preset to 120-150 PSI, 4-Port Manifold (1/4" NPT), manual on/off lever switch, 1/4" compression-style Unloader Valve. Replace the...

Air compressor cylinder ring and o-ring kit. Includes compression ring, head o-ring, and valve plate o-ring.  This tends to be a high-wear part, especially if you are in a high-particulate...

Isolator for pump base. Keep your compressor from damage by replacing these isolators if missing or damaged.

Universal Regulator: 4-port, two 1/4" FPT ports, and two 1/8" FPT ports (gauges sold separately here). The regulator controls the amount of air in your air compressor hose. Replace this if you're not...

Old Part Numbers: AB-ACG18Saddle mount cup for the motor/pump feet. This installs on the mounting feet of the motor/pump assembly and keeps it from vibrating, as well as reducing noise.

Screw to bolt the fan to the motor, .250-20 x .750 U.

Old Part Numbers: AC-0558Grip for the air compressor handle, .875" diameter.

Heavy duty 14-gauge power cord ST rated with moulded strain relief, 9/16" OD with terminals. For high-amp motors such as portable air compressors. 

Old Part Numbers: D20763, D27254, D206434-Port OEM Air Regulator. The Regulator controls the amount of air to your hose. Replace this if you're not able to adjust the PSI to your hose or if it leaks...

1/4" male NPT x 1/8" female NPT brass bushing reducer for air compressors.

Old Part Numbers: D20675, AC80-BQuick-connect coupler, 1/4" male NPT x 1/4" body.

Screw that fastens the front and back of the belt  guard to each other, and to the compressor base. THD FORMING

Old Part Numbers: D24888, D30198, 5135135-00Pipe Nipple, 1/4" male NPT x 1/4" long. Don't forget to apply Teflon Tape to the threads to seal it.

Old Part Numbers: SSF-3158-1This is the screw that holds down the piston cover, on the top of the piston.

Screw for the eccentric bearing assembly on crankshaft.