Old Part Numbers: A19715, CAC-4337-1, D288261/2" male NPT x 1/2" compression check valve, with 1/4" compression adapter. For model D55167 type 1 and others. If the small unloader (bleeder) valve on...

Old Part Numbers: CAC-291-1, Z-CAC-291-1Top head gasket.

Old Part Numbers: 5130038-00, 5130024-001/4" OD brass compression nut and sleeve for bleeder (unloader) tube for air compressors.

Old Part Numbers: MDR11Condor MDR11 series air compressor pressure switch. Cut-on PSI 120, cut-off PSI 155. 120V / 230V-240V. Replace the pressure switch if the compressor no longer cuts in or cuts...

Must order quantity of 4 for complete set. 1/4"-20 x 1-1/4 length.

Old Part Numbers: SRV250175, 1229O-175Air compressor safety relief valve, 1/4" MPT, 175 PSI, ASME. If your valve leaks below the pressure listed on the side of the valve, replace this vital safety...

Air filter for air compressor with universal filter style with 1/2" mounting threads and includes replaceable air filter element.

1/2" compression nut and sleeve, brass.

Old Part Numbers: 265-16Crankcase/Base Gasket for the Craftsman/DeVilbiss/Porter Cable in-line, twin-cylinder, single-stage aluminum air compressor pumps. This is the Gasket in between the bottom...

Old Part Numbers: AC-0558Grip for the air compressor handle, .875" diameter.

Poly-groove J6 Ribbed Belt for air compressors, 38" outer circumference. Belt Width (in) : .563 in.Belt Width (mm) : 14 mmEffective Circumference (in) : 38 in.Effective Length (mm) : 965 mm

Plastic plug for the piston pin (two used per piston).

Vent filter for the pump crankcase. This fits into the top of the cylinder.

Old Part Numbers: 68-4-21/8" male NPT x 1/4" compression adapter for air compressor unloader/bleeder line. A very common adapter to attach the 1/4" OD unloader/bleeder line from the unloader valve on...

Replace if pitted or grooved along w/ 2 new rods. -Rods not inlcuded-

2" OD, 200 PSI, 1/4"

Old Part Numbers: SST-108, A14785Rubber air compressor isolators with screws, three (3) included.

Old Part Numbers: A14877, N044990, SS-1286, 5130029-00, 5131153-001/4"-18 x 1" male NPT close pipe nipple. For model D55167 type 1 & 2 and others. Remember to apply plumber's tape to the threads.

Old Part Numbers: 5130032-00For model D55167 type 2 & 3 and others.

For model D55167 type 2 & 3 and others.

Pin for the piston. One used per piston.

Old Part Numbers: A17363SV

Washer for the flywheel bolt.

For Regulator Manifold.

Old Part Numbers: SUDL-65

Old Part Numbers: SSN-56-ZN1 X 11/32 X 1

Old Part Numbers: SSF-993 Also available in Fastener Kit # KK-4929.