1/4" Ball Valve Drain Cock for air compressors. Keep your tank from rusting. Replace this if it is leaking or will not work.

Old Part Numbers: E100048, E100104, E100794, E100434, E101178, E100204, E100846Protect your air compressor pump from damage with this air filter assembly intake, 1/2" NPT. Includes the filter base,...

Element only for air compressor air filter assembly. Also offered is the E100Kit, which includes the filter element, oil sight glass, and crankcase breather. Replacing the pump's air filter regularly...

Air compressor safety relief valve, 1/4", 165 PSI. If your valve leaks below the pressure listed on the side of the valve, replace this vital safety feature.Specifications MPT Inlet: 1/4 in. FPT...

Old Part Numbers: 101362Compressor check valve that fits select Craftsman, Porter Cable, and Husky air compressors. Note: Two check valves were used on this unit in the past by the manufacturer. For...

Old Part Numbers: E101805Rubber Isolator Foot. Keep your air compressor from walking away and reduce excess vibration.

Old Part Numbers: E100059Adjustable air compressor air pressure knob assembly (pressure gauge sold separately). If air leaks from the regulator, or when you turn the knob it doesn't adjust the PSI up...

Old Part Numbers: PG0250200LBKAir Compressor Pressure Gauge, 1/4" MPT Back-Mount, 200 PSI, 2" Face. Replace if misreading or broken.Specifications NPT: 1/4" Dial / Face: 2"  PSI: 200 PSI Back-Mount

Old Part Numbers: E105176Pressure Switch Assy, 125 psi cut-in, 155 psi cut-off. 4-Port Manifold, 90° Compression Unloader Valve. Replace the air compressor pressure switch if the unit doesn't cut on...

Air Compressor Pressure Relief Tube Kit includes the tube, nuts, and ferrules.

Start Capacitor for motor. The Start Capacitor helps the motor overcome inertia and start smoothly, especially under load; it stores energy that is released upon startup. Please note: Capacitors can...

Old Part Numbers: E103621Main discharge (outlet) tube from the air compressor pump head to the tank. Includes compression nut and sleeve.

Strain relief to secure the power cord to the air compressor pressure switch.

14 AWG replacement AC power cord for air compressors. 3-prong, 6 ft.

Old Part Numbers: E103987, E103440Strain relief that clamps the electrical cord into the air compressor pressure switch.

Old Part Numbers: E103485Handle for air compressor. Does not include hardware.

Air compressor exhaust elbow. Threads into the exhaust port in the head and the discharge tube threads into the other end.

Old Part Numbers: 100307Brass quick connect coupler for air compressors, 1/4" body x 1/4" NPT.

Old Part Numbers: 5140186-77Wheel Kit, 7" OD. Includes nut and bolt.