1/4" Ball Valve Drain Cock for air compressors. Keep your tank from rusting. Replace this if it is leaking or will not work.

Order this if ordering valve plate or a new head.

Old Part Numbers: N021229Air Compressor Piston / Cylinder Kit includes the Piston / Rod Assembly with bearing, cylinder cup, and O-rings for model D55127 type 3 and others. This kit is used on many...

Rubber o-ring for air compressors, .362ID x .103W. This is the o-ring seal for the pump end of the outlet tube.

Old Part Numbers: N011005, A12210Replaces the A12210 belt. Replace your air compressor drive belt if it is frayed or loose.Specifications Overall Length: 30-1/2" Half Length: 15-1/4" Width:...

Screw (fastener) for the motor/pump shroud.

1/2" compression nut and sleeve, brass.

Air compressor regulator repair kit includes the plug with ring, o-ring, spring, piston with seal, disk with o-rings, and seal lube with instructions. Used on many brands from Craftsman to DeVilbiss...

Replacement Air Filter Element for Twist-Lock Air Filter Assembly for air compressors. Filter element only (diameter is 2-3/8" and height is 1"). Replacing the pump's air filter regularly is...

Old Part Numbers: AB-ACG18Saddle mount cup for the motor/pump feet. This installs on the mounting feet of the motor/pump assembly and keeps it from vibrating, as well as reducing noise.

Screw to bolt the fan to the motor, .250-20 x .750 U.

Heavy duty 14-gauge power cord ST rated with moulded strain relief, 9/16" OD with terminals. For high-amp motors such as portable air compressors. 

Keep your pump running cool by replacing the fan if any fins are missing or damaged.

Old Part Numbers: A20723, a20723 5140122-80 is for the SPRING only. For the BRUSH, order A10157SV.

Poor performance or air leaks out of the intake filter while the unit is running? The valve plate assembly is probably the problem.

Old Part Numbers: D24345, WL011900AVAir compressor air filter assembly with the element. 3/8" NPT, plastic nipple. The interior paper element is not available separately. Click here to upgrade to a...

Old Part Numbers: D29132 Also available in Fastener Kit # KK-4929.

Air compressor outlet tube, 1/2" OD, 4G HC. Make sure to order compression nuts, sleeve, and o-ring if needed.

Old Part Numbers: D20675, AC80-BQuick-connect coupler, 1/4" male NPT x 1/4" body.

A10157SV is the BRUSHES only. For the SPRINGS, order 5140122-80.

Screw that fastens the front and back of the belt  guard to each other, and to the compressor base. THD FORMING

Old Part Numbers: SST-108, A14785Rubber air compressor isolators with screws, three (3) included.

Old Part Numbers: A14877, N044990, SS-1286, 5130029-00, 5131153-001/4"-18 x 1" male NPT close pipe nipple. For model D55167 type 1 & 2 and others. Remember to apply plumber's tape to the threads.

Old Part Numbers: N028208SV, A18886Complete Regulator Manifold Assembly. Includes: Manifold, Regulator, Pressure Gauges, and Couplers.

Old Part Numbers: AC-0469 Safety valve

Old Part Numbers: 5130032-00For model D55167 type 2 & 3 and others.

Old Part Numbers: A19440, 1653510 inch foam filled

For model D55167 type 2 & 3 and others.

Old Part Numbers: A16612, 5130066-00

1.25 OD 18

Old Part Numbers: D20675, AC80-B, A19513

Isolator for the pump/motor assembly. Keep your pump running smoothly and replace if damaged or missing!

Old Part Numbers: A13969, 5130062-00, N000231

Old Part Numbers: A21107, A21107SVFor model D55167 type 2 & 3 and others.

Old Part Numbers: 5130969-00

Old Part Numbers: 5130060-00

Old Part Numbers: Z-GA-370300PSI,2IN,1/4NPT,BK

Old Part Numbers: 5130055-00If your pressure switch is leaking out of the small bleeder valve on the side or if located underneath, order a tank check valve instead, your pressure switch is ok.

Old Part Numbers: A13005For model D55127 type 1 & 2

The DeWalt D55146 Heavy-Duty 4.5 Gallon, 225 PSI, Hand Carry Compressor with Wheels is quiet, efficient and solidly built, and is constructed to withstand harsh jobsite conditions. Its dual...

Old Part Numbers: A19623, N006514, N130635

Old Part Numbers: SSF-993 Also available in Fastener Kit # KK-4929.