Old Part Numbers: 072-0006Replace this air compressor drain valve if leaking or will not work. Prevent rust from ruining your tank by draining your tank daily. Keep an extra around for a spare. This...

O-ring Seal for the discharge (outlet) tube to the pump head.

Old Part Numbers: 5130038-00, 5130024-001/4" OD brass compression nut and sleeve for bleeder (unloader) tube for air compressors.

Old Part Numbers: GA016300AV, GA016310AV, GA016303AV, GA016308AV, GA016313AVPressure Gauge. 0-300 PSI, 1/8" NPT, Right-mount, 1.625" face. Use Teflon tape on the threads when installing.

Brass compression nut and sleeve for 3/8" OD tubes.

Hubbell 69JF7LY2C Pressure Switch, 4-Port (1/4" female NPT), 95/125 PSI factory preset with unloader valve. Replace the pressure switch if the unit doesn't cut on or off at the designated pressure...

Isolator for the pump/motor assembly base. NOTE: To replace all of them you will need to order a quantity of 3. Keep your compressor from vibration damage and replace if any are missing.

Universal Regulator: 4-port, two 1/4" FPT ports, and two 1/8" FPT ports (gauges sold separately here). The regulator controls the amount of air in your air compressor hose. Replace this if you're not...

Hex Nut for the pump head. The discharge tube attaches to this part. Order the required AC-0781 O-ring Seal as well if needed.

Old Part Numbers: AB-ACG18Saddle mount cup for the motor/pump feet. This installs on the mounting feet of the motor/pump assembly and keeps it from vibrating, as well as reducing noise.

Old Part Numbers: SRV187150, SRV187-1/8Air compressor safety valve, 150 PSI, 1/8" male NPT. If your valve leaks below the pressure listed on the side of the valve, replace this vital safety feature.

Old Part Numbers: 1/4XHEXNIPPLE BR, 1/4XHEXNIPPLE STBrass 1/4" male NPT x 1.5" long hex pipe nipple for air compressors. A very common part used to connect accessories like the regulator, pressure...

Old Part Numbers: 68-4-21/8" male NPT x 1/4" compression adapter for air compressor unloader/bleeder line. A very common adapter to attach the 1/4" OD unloader/bleeder line from the unloader valve on...

Screw that fastens the front and back of the belt  guard to each other, and to the compressor base. THD FORMING

Old Part Numbers: 5130940-00, SSF-8080-ZNFlange nut to attach the wheel to the air tank.

Screw to fasten the handle to the compressor base.

Old Part Numbers: PS3030RVUnloader Valve used on many Furnas / Hubbell brand air compressor pressure switches includes the unloader valve with compression nut and sleeve, and screw. Replace this part...