Old Part Numbers: A19715, CAC-4337-1, D288261/2" male NPT x 1/2" compression check valve, with 1/4" compression adapter. For model D55167 type 1 and others. If the small unloader (bleeder) valve on...

Old Part Numbers: CAC-291-1, Z-CAC-291-1Top head gasket.

Old Part Numbers: 5130038-00, 5130024-001/4" OD brass compression nut and sleeve for bleeder (unloader) tube for air compressors.

Must order quantity of 4 for complete set. 1/4"-20 x 1-1/4 length.

Old Part Numbers: SRV250150Air compressor safety relief valve, 1/4" MPT, 150 PSI, ASME. If your valve leaks below the pressure listed on the side of the valve, replace this vital safety feature...

1/2" compression nut and sleeve, brass.

Old Part Numbers: GA031900AVAir compressor pressure gauge. Replace if cracked or reading inaccurately. Specifications 1/4" MPT 2" Face Right-Mount 300 PSI

Plastic plug for the piston pin (two used per piston).

Screw for the pump head. NOTE: Torque head bolts down to 52 in/lbs.

Vent filter for the pump crankcase. This fits into the top of the cylinder.

Replace if pitted or grooved along w/ 2 new rods. -Rods not inlcuded-

Old Part Numbers: SSW-7367Strain relief for air compressor power cord going into the pressure switch housing.

For model D55167 type 2 & 3 and others.

Pin for the piston. One used per piston.

Washer for the flywheel bolt.

Old Part Numbers: CAC-4205, SUDL-402-2Assembly Cord Motor SJT for air compressors.

.313-18 WING

110/135 psi 4 port 2  3/8" ports and 2  1/4" ports  90° unloader

Old Part Numbers: SSN-56-ZN1 X 11/32 X 1

Old Part Numbers: SSF-993 Also available in Fastener Kit # KK-4929.