Old Part Numbers: 180421, 184218mm.

NOTE! This Filter will only fit 2HP models! Order part number 90227 for 1HP models. Click here for SKU 90227.Extra DetailsA clean air filter is essential to the performance of an air compress

If your unit has a hard time restarting when trying to cycle, order this. If your pressure switch is leaking out of the small bleeder valve on the side (or underneath), order this valve. NOTE: This...

1/4" Ball Valve Drain Cock for air compressors. Keep your tank from rusting. Replace this if it is leaking or will not work.

Also known as a "cold start" valve, this integral component releases air off of the piston and pump head after it shuts off, which allows the motor to start much more easily and efficiently. This...

Elbow fitting / adapter for air compressor. Used to change the direction of airflow.

Old Part Numbers: SRV250140Air compressor safety relief valve, 1/4" MPT, 140 PSI. If your valve leaks below the pressure listed on the side of the valve, replace this vital safety feature...

Old Part Numbers: 90393Air compressor pressure switch assembly. If the compressor doesn't cut in or cut out at the designated PSI, most likely the pressure switch is defective. NOTE: If your pressure...

Electromagnetism Valve for 110V units.

Old Part Numbers: 90506-RRegulator for California Air Tools air compressor. Regulator (Round)

"T" fitting for the cold start valve. This valve installs into the pump head. The braided discharge tube threads into one end and the cold start valve is installed in the other.

1/4" Quick Connect for California Air Tools air compressors.

California Air Tools cushion foot

OEM replacement Pressure Gauge 2.0″ Face, 1/4" NPT Center Back-Mount, 0-180 PSI.

Smaller capacitor for 2 HP, 110V models rated at 90 uF. NOTE! For newer models with unit serial# ending in "-O". Please note: Capacitors can not be returned for a refund unless proven to be defective.

Pressure Gauge for California Air Tools compressors. Replace if the gauge needle doesn't move or if leaking. Specifications 1.5" face back-mount gauge 175 PSI-rated

California Air Tools screw for the capacitor cap/cover. Teplace these screws if your capacitor cover is missing them. Safety first!

This is the nylon hose in the intake port of the air intake filter.

Washer for the Cushion Foot.

Bolt for Cushion Foot.

California Air Tools Air Compressor Pump Replacement, Complete Assembly, Ultra Quiet, Oil-Free, 2 HP. Comes with: (1) capacitor, (2) air filters, and (4) shock struts. Oil-Free Pump = Cleaner air for...

1/4" NPT countersunk hex pipe plug for the head.

California Air Tools air compressor nut for cushion foot.

Old Part Numbers: Connecting Bar1/4" x 1/4" NPT hex pipe connector. One end installs into the manifold of the pressure switch and the other end connects the air regulator to it.

2HP Shock Strut

Washer for M8 Screw

SR-7K-2 Black Strain Relief

Power Cord with Plug for California Air Tools air compressors, 110V.

Larger capacitor for 2 HP, 110V models rated at 150 uF. Please note: Capacitors can not be returned for a refund unless proven to be defective.

Complete Air Dryer Assy for California Air Tools units, includes all you see pictured here.

Flange Bolt M6 X 1.0 X 20mm Galvanized.

Washer Split Lock for Screw 6mm