CWA5591016.4, CWA5591016.5 #01AE00
Model Numbers: CWA5591016.4, CWA5591016.5
Repair Parts for the Industrial Air CWA5591016.4 & CWA5591016.5 Portable Single-Stage Oil-Bath Gas Air Compressors
- Min RPM 700
- Max RPM 1200
- Max pressure 125 psi
- Max duty cycle 50%
- Oil capacity 18 oz.
- 130 Pump 6.0 cfm @ 90psi (2 HP motor)
- 165 Pump 10.1 cfm @ 90spi (5 HP motor)
- 39 lbs.
- Torque specs (see Schematic on "Description" tab)
- For 2-4.5HP units, you have a 130 pump
- For 5HP and greater they call it a 165 pump. The only difference is the crankshaft and connecting rods.
- Make sure of your pump model before ordering these parts or a new pump.
- New pump comes with felt style air filter. Old canister style not available with new pumps.
- New style pump has 1/4" FPT & 1/8" FPT outlet ports in head. (Your old head may be 1/2" and will need an adapter or simply order a short block and use your old head and flywheel)
- If replacing valve plate or purchasing short block, please order the felt style filter and screen as the new style valve plate will not hold any other filter setups.
- Head bolt torque 220-200 in lbs.
- Carrier bolt torque 170-230 in lbs.
- Flywheel bolt torque 150-250 in lbs.
- Bottom oil pan torque 30-50 in lbs.
- Connecting rod torque 160-200 in lbs.
This short video shows the different air filter assemblies used on the Sanborn 130 pump and the Sanborn 165 pump.
Price: Now: $1.35Was:Old Part Numbers: 60-4-61-4, 058-0017-MAT1/4" compression nut and sleeve. Order two, one for each end of the tube.Price: Now: $1.35Was:
Price: Now: $25.95Was: $51.78Old Part Numbers: G154STwist-Lock Air Filter Assembly for air compressors. 1/2" MPT. Includes filter element 10-SOL filter element. Replacing the pump's air filter regularly is important to maintain the performance and longetivity of your air compressor...Price: Now: $25.95Was: $51.78
Price: Now: $24.95Was: $45.40Metal Twist-Lock Air Filter Assembly for air compressors. 1/2" MPT. Uses the #06-SOL filter element. These combination filters come with a silencer installed at the air compressor's intake and in an open, hood, and silencer tube design. The hood design...Price: Now: $24.95Was: $45.40
Price: Now: $7.99Was: $9.76Old Part Numbers: 68-6-4If your pump has an 'X' in front of the serial number and your supply tube measures 3/8" OD, then order this 1/4" NPT x 3/8" Compression adaptor.Price: Now: $7.99Was: $9.76
Price: Now: $29.84Was:If replacing crank or rings, replace this gasket. (8 bolt style)Price: Now: $29.84Was:
Price: Now: $36.68Was:Price: Now: $36.68Was:
Price: Now: $14.50Was:Price: Now: $14.50Was:
Price: Now: $23.06Was:Price: Now: $23.06Was:
Price: Now: $311.64Was:Price: Now: $311.64Was:
Price: Now: $35.76Was:Connecting Rod up to 4.5HP for 130 pump. Torque 160-200 in. lbs.Price: Now: $35.76Was:
Price: Now: $5.10Was:Price: Now: $5.10Was:
Price: Now: $15.93Was:Replace when removing crankshaft, bearings or if leaking.Price: Now: $15.93Was: