Old Part Numbers: ST067300AV, HF004500AVThis Ferrule is placed inside a compression nut to help stop air leaks. Genuine OEM replacement part.

Old Part Numbers: 072-0006Replace this air compressor drain valve if leaking or will not work. Prevent rust from ruining your tank by draining your tank daily. Keep an extra around for a spare. This...

Old Part Numbers: SRV250140Air compressor safety relief valve, 1/4" MPT, 140 PSI. If your valve leaks below the pressure listed on the side of the valve, replace this vital safety feature...

Old Part Numbers: 61-8

Crankcase breather assembly for air compressor models with threaded type crankcase for the breather. This assembly tightens into the crankcase; typically has an oil-level sight gauge.

Adjustable air regulator assembly for air compressor units that have a 4-port pressure switch. 1/4" FPT inlet/outlet, 1/8" FPT port for pressure gauge (to maximize performance, we recommend including...

This compression adapter kit converts the new single-outlet air compressor pump head into 2 outlets. This will save you from having to purchase the expensive check valve for many older-style units...

Element only for air filter assembly. Order 2 or 3 for spares. Replace this every 3-4 months if the compressor is used frequently. A clean filter allows your pump to operate at its max...

Old Part Numbers: 154-4L500Air compressor v-belt, 4L500. Replace if frayed or slipping.Specifications A-type belt, 1/2" wide Outside Dimension: 50" "A" Belt Conversion: A48

Old Part Numbers: TQ011300AJ, TQ900400AJ, VT470800AJQuad valve plate assembly for air compressors includes the valve plate with valves installed, upper and lower gaskets ONLY. This replaces part...

Old Part Numbers: 019-0239, 201793GS, D23190This Air Filter Assembly, V-Twin Single Stage is the same as the VH901700AV Filter, but has 1/2" MPT PLASTIC threads. One complete assembly. Includes...

Old Part Numbers: AB-9053138, AB-9050373, ST070324AV, 90503731/4" MPT x 1.5" steel pipe nipple. Be sure to apply plumber's tape on the threads before installation.

Old Part Numbers: CV221502AJ, CV221502SJ, CTD1212QR1/2" Compression x 1/2" MPT air compressor check valve with quick-release fitting for unloader/bleeder tube. The check valve is a one-way valve that...

Old Part Numbers: VT470900AJCampbell Hausfeld VT Air Compressor Pump Gasket Kit includes crankcase gasket, cylinder gasket, valve plate o-ring gasket, bearing cover o-ring, and oil seal. For newer...

Old Part Numbers: VT482200AJ, VT480000KB, VT480000AV, VT481400AJ, VT470200KBComplete VT4823 air compressor pump with flywheel and air filter assembly. Single-stage, 1-2 HP. Has a 38mm stroke. Used on...

Old Part Numbers: 68-8-6Air compressor compression adapter, 1/2" compression x 3/8" MPT, no lead. Use this to attached the discharge tube to the pump's discharge outlet.

Old Part Numbers: GA016300AV, GA016310AV, GA016303AV, GA016308AV, GA016313AVPressure Gauge. 0-300 PSI, 1/8" NPT, Right-mount, 1.625" face. Use Teflon tape on the threads when installing.

Oil Sight Glass so you can keep an eye on the pump's oil level. Note: Order this item for models 4B246C and for pumps that have a threaded oil breather!

Old Part Numbers: PU015900AG, PU015900AJ, PU015900AVCast-iron replacement air compressor flywheel, 10" O.D. x 3/4" I.D. Includes the set screw and key.Specifications 3/16" keyway 1/2" 4L, "A"-section...

Plastite screw, 5/8" long. Screw for the plastic shroud, belt guard, etc. Note: Also used on models WL650103, WL651900, WL650703, WL651004, WL651000AJ.Specifications5/8" long

Old Part Numbers: PM004904AVKey for Flywheel, 3/16" x 1" length. Replace this if missing to keep your flywheel securely on the pump shaft.

Old Part Numbers: 31551/4" MPT to 1/8" FPT bushing adapter. If you need a 1/4" MPT fitting, but the part you have is only 1/8" MPT, then use this bushing adapter.

This handy maintenance kit includes a VH series air filter assembly and one (1) quart of high-quality synthetic blend lubricant to keep your air compressor running like a champ! Metal air filter with...

Old Part Numbers: ST119301AV, QR1/8" NPT x 1/4" nylon tube. This allows 1/4" nylon tubing to push to fit into this fitting. The 1/8" MPT threads screw into the unloader area of the air compressor...

Old Part Numbers: MC013200AV, MC05502SJ, MC015500AJ, MC015502AJ, MC015502SJ, MC015502IP, MC019800IP, MC019800SJ, MC035601AV, MC027800AJ, MC035601AJ, MC035602SJ, MC018000IPBrand new OEM motor used on...

Old Part Numbers: CW207576AVPressure Switch replacement, 100/125 PSI, 4-port, on/off switch with unloader valve. Replace the pressure switch if the compressor no longer cuts in or cuts out at the...

Old Part Numbers: HL001800BH, VS001000AV, HL001801BHHandle for the air compressor tank.

Old Part Numbers: ST074415AV, ST120200AV, ST073236AVIncludes six (6) screws.

Two Sets.

This handy maintenance kit includes a VH series air filter assembly and one (1) quart of high-quality full synthetic lubricant to keep your air compressor running like a champ! Metal air filter with...

This handy maintenance kit includes a VH series air filter element and one (1) quart of high-quality full synthetic lubricant to keep your air compressor running like a champ! For VT, TQ, and VH air...

Fits select VT47 & VT48 series pumps. Includes: Bearing Cap, Oil Seal, and O-ring.

Air Compressor Pump Quad Head Fastener Kit includes the bare head and head bolts. Order gaskets separately. Remember to tighten the bolts down to the proper torque specs as noted by the manufacturer.

Old Part Numbers: ST084202AV-MATBall bearing, 20mm, 6204.

This handy maintenance kit includes a VH series air filter element and one (1) quart of high-quality synthetic blend lubricant to keep your air compressor running like a champ! For VT, TQ, and VH air...

Old Part Numbers: STD-3353/8"-16 flange nut. Also used on models VT627000, VT629100, VT618202 and VT622001.

Old Part Numbers: PU015200AG, PUAK26X0625, PU015200AV2.56" OD, used on 120/240 volt models.

New Crankshaft Assembly with Ball Bearings, Connecting Rods, and Pistons. For pumps that end in "AV" ONLY! Includes crankshaft, bearings, rings, conrods, and pistons. NOTE! This will not fit pump...

Old Part Numbers: ST042400AVTapping Screw, 10-24 x 5/8". This is the screw that fastens the belt guard halves, and fastens it to the compressor. Used on model VT634500 and others.

Old Part Numbers: STD-334Axle Bolt for the wheel (order two if you need the bolt for two wheels). Note: Also used on models VT627000, VT629100, VT618202, and VT622001.

9”,  1/4" PTFE TUBE, .062 WALL Unloader tube

Cap for Oil Drain Extension

Old Part Numbers: ZV007005SJ, BG217902AV, BG313200AV, BG217800AV, VT551953AVFront and back belt guard assembly. Includes hardware to install it. NOTE: This is now a kit made of heavy duty wire.

Fits model# VT4722 and VT4822

Old Part Numbers: ST022300AV, STD-2231/8" male NPT pipe plug. Used to plug accessory threads in the air compressor manifold, regulator, pressure switch (etc.).

For 120/240 volt models.

Old Part Numbers: CW000800AV, 69DJAAir compressor bleeder (unloader) valve. Replace if broken, but replace the check valve if this constantly leaks after the compressor shuts off.