Old Part Numbers: Z-AC-0032, AC-0032Valve plate comes with preinstalled valves and o-rings. Poor performance or air leaks out of the intake filter while the unit is running? This is probably the...

Old Part Numbers: K0058, K-0058, K0650, K-0650 Sears 919.16014, 91604, K-0650Compression ring replacement kit includes the cylinder, piston ring, retaining screw, o-ring, and head o-ring. Restores...

Old Part Numbers: KK-4835, CAC-118, 889124, 889125, 891125, AC-0788, CAC-1118, D25009, D25837, CAC1118, CAC118, CAC-249, CAC-249-1, A02743, K-0651, KK-5081, 889124 889125 891125 AC-0788 CAC-1118...

Old Part Numbers: CAC-1372Protect your pump from damage by keeping clean or replacing. Air Compressor Air Intake Filter for Many Single Cylinder Oil-less Pumps Part # D24233:Replaces CAC-1372<

There are several different air compressor cooling fan styles. Choose this if yours looks like this one. Replace if cracked or missing fins.

Muffler for Single Cylinder units.

Air compressor check valve. 3/8" Comp x 1/2" MPT with 1/8" FPT side port.  The check valve is a one-way valve that prevents air from back-feeding from the air tank. If your unit has a hard time...

O-ring Seal for the discharge (outlet) tube to the pump head.

Old Part Numbers: AC-0037, ACG-26Pump head 3/8" FPT filter port and 3/8" outlet portSpecificationsThis head has 3/8" FPT threaded ports on both sides. If your head has a 3/8" port 90° from the air...

O-ring seal for air compressor valve plate, installs in between the cylinder and valve plate. Used with origina

Old Part Numbers: 5130038-00, 5130024-001/4" OD brass compression nut and sleeve for bleeder (unloader) tube for air compressors.

Bushing Filter Retainer. This bushing (retainer) keeps the air intake filter element in place.

Must order quantity of 4 for complete set. 1/4"-20 x 1-1/4 length.

Order this if ordering valve plate or a new head.

Brass compression nut and sleeve for 3/8" OD tubes.

Air compressor compression ring, pre-formed. Note: After you install the ring on the piston rod, install the rod in the cylinder by inserting the rod from the top of the cylinder and pull it down...

Screw (fastener) for the motor/pump shroud.

Air compressor regulator repair kit includes the plug with ring, o-ring, spring, piston with seal, disk with o-rings, and seal lube with instructions. Used on many brands from Craftsman to DeVilbiss...

Air compressor cylinder ring and o-ring kit. Includes compression ring, head o-ring, and valve plate o-ring.  This tends to be a high-wear part, especially if you are in a high-particulate...

Isolator for the pump/motor assembly base. NOTE: To replace all of them you will need to order a quantity of 3. Keep your compressor from vibration damage and replace if any are missing.

Universal Regulator: 4-port, two 1/4" FPT ports, and two 1/8" FPT ports (gauges sold separately here). The regulator controls the amount of air in your air compressor hose. Replace this if you're not...

Hex Nut for the pump head. The discharge tube attaches to this part. Order the required AC-0781 O-ring Seal as well if needed.

Old Part Numbers: AB-ACG18Saddle mount cup for the motor/pump feet. This installs on the mounting feet of the motor/pump assembly and keeps it from vibrating, as well as reducing noise.

Screw to bolt the fan to the motor, .250-20 x .750 U.

Old Part Numbers: AC-0558Grip for the air compressor handle, .875" diameter.

Screw that fastens the front and back of the belt  guard to each other, and to the compressor base. THD FORMING

Old Part Numbers: 5130940-00, SSF-8080-ZNFlange nut to attach the wheel to the air tank.

2" OD, 200 PSI, 1/4"

Screw to fasten the handle to the compressor base.

Old Part Numbers: SSF-3158-1This is the screw that holds down the piston cover, on the top of the piston.

Old Part Numbers: SUDL-431-2, 29.90

Screw for the eccentric bearing assembly on crankshaft.

For Regulator Manifold.