Industrial Interchange Coupler 1/4" #0999CF

Old Part Numbers: HF102500AV1/4" Body x 1/4" MPT

COMPRESSION ADAPTER #0E52EE

Old Part Numbers: 68-6-4If your pump has an 'X' in front of the serial number and your supply tube measures 3/8" OD, then order this 1/4" NPT x 3/8" Compression adaptor.

1/4" HD Wingnut Drain Cock #07F8E3

1/4" NPT Heavy Duty drain cock. Prevent rust from ruining your tank by draining your tank daily. Keep an extra around for a spare.

TUBE-TRNSFR FLX STL BRD 5.5 #058E74

Old Part Numbers: S145-0543, 145-0456S.S. braided tube from pump to tank. Replace if leaking. 5.5" Long with 3/8" compression fittings on each end.

Knob #058E9E

Knob only (does not include the small Pin).

BELT-CARLISLE .650 WIDE #05935C

Belt - .650" Wide, (5/8") 6" Diameter. Is your motor turning yet you have no pressure? Typically this is caused by a torn belt. To make installation easier, "walk" the belt onto the pulleys like you would a bicycle chain.

VALVE PLATE ASSEMBLY UMC #058E56

(incl. 5,6,7) Valve plate and gaskets. Poor performance or air leaks out of the intake filter while the unit is running? This is probably the problem.

Filter #0590D0

Hubcap, 1/2" #058E31

Hubcap for wheel, 1/2". Two required.

Pipe Plug, 1-1/2 Npsm #059022

Grommet #059008

Old Part Numbers: 093-0050

Head O-ring #059036

Head #059034

O-ring #0591B8

Bottom Valve Plate Gasket. DOES NOT GO ON PISTON

Screw, #10 X 3/4 #0590E0

Check Valve #058EA4

To test this part. Run unit, turn off power, remove pressure line from pump. If air leaks from tank, then replace this. If your pressure switch is leaking out of the small bleeder valve on the side or if located underneath, order this valve.

Handle Switch #0590CC

Large Spring #058D3B

Old Part Numbers: 055-0057Only available in the 215902 Reg Kit and others.

GROMMET INTAKE MUFFLER #058E58

For air filter.

Regulator Repair Kit UMC #058EA0

Includes Internal parts only. Click on "Tech Pubs" tab for installation instructions!Technical Documents

Bushing #059020

1-1/2 Npsm X 1/4 Npt.  NOTE: Also order the 513-0002 o-ring seal to complete the repair.

Screw Plastite #058FFE

COMP NUT & SLEEVE 3/8" #0590BE

3/8" OD. Nut for transfer tube.

Handle Grip #0590DE

Keeps your unit from slipping out of your hands.

Regulator Repair Kit #05BFD3

Includes Plastic Knob w/ Spring and Internal Service Kit. Save and order the kit.

Nylon Tube, 1/4" OD #05BFE1

Old Part Numbers: 079027007017Use this nylon tube if your pressure switch has a plastic unloader valve with a quick-connect fitting. NOTE: sold by the foot (qty. 1 = 1 ft of tubing).

3/8" Compression Nut and Sleeve #05BF92

3/8" compression nut and sleeve. Order two, one for each end of the tube.