1/2" MPT Air Filter Assembly #0A12A0

Metal Assy, 1/2" MPT x Ht 3.80" x W 3.25" Twist Lock. Uses 06 element.

O-RING REDUCER 1.5 TO.25 #01AADF

Compression Conn Fitting Assembly 1/2 X 3/8 MPT #01A902

Old Part Numbers: ST159001AV, ST159001AJCompression Connector, 1/2" Comp X 3/8" MPT. 

TAPPING SCREW10-24 X 58 Replaced by ST073277AV #01A98A

Old Part Numbers: ST042400AVUsed on model VT634500

KEY .1875 SQX1.44 LONG #01A97A

Filter Element, Felt #01A8EE

Ball Bearing #01A8DC

Pressure Switch, 100/135 PSI #01AB5F

Old Part Numbers: CW209000AJ, CW208800AJFor models with line cord and plugs. 100 PSI cut-on, 135 PSI cut-off, w/ 90 degree unloader valve, 4-port manifold, on/off switch.Extra DetailsIf the 90-degree unloader valve leaks (where the 1/4" bleeder line...

Crankcase Breather Vh & Vt CHA #01AA8D

Note: breather assembly for models for threaded type crankcase. This assembly tightens into the crankcase; typically has an oil level sight gauge.

Handle VT VS WL Black #01A964

Old Part Numbers: HL001800BH, VS001000AV

SHAFT KEY 3/16 X 1 #01A8C8

Old Part Numbers: PM004904AVFor flywheel.

3 PORT REGULATOR #01A92E

Old Part Numbers: RE206901AV, RE206200AVAdjustable air pressure knob assembly. (Gauge sold separately).

AIR FILTER ASSEMBLY W/ELEMENT VH300 #01A8EC

Old Part Numbers: MP333200AJ, MP333200SJMetal air filter w/ element, 1/2" MPT. For VT, TQ and VH style pumps. This new metal style replaces the plastic felt style. If you need the filter element only, order VH901800AV. NOTE: This...

FILTER COVER FRONT #01AEA0

Front air filter cover. Uses element ST163100AV. Use VH901700AV to replace entire assby.

CAMPBELL CHECK VALVE KIT Unloader Line Kit #01AC7F

Old Part Numbers: PS846234VM, MP513901AJMay need this too if converting from old style pump to new pump. Check valve is NOT included in kit. May need to order new check valve with 1/8" port on side in addition to this kit if your check valve does NOT...

Oil Dipstick w/Filter Breather Assembly Grey #01A8D8

Old Part Numbers: VT041703AJ, VT041703AV Note: dipstick model for 'push in' type crankcase.

BUSHING ADAPTER 14-18 X 18-27 #01A934

Old Part Numbers: 31551/4" x 1/8" Adapter. If you need a 1/4" MPT fitting, but the part you have is only 1/8" MPT, then use this bushing adapter.

Wire Belt Guard Group, Front #01A982

Old Part Numbers: ZV007005SJ, BG217902AV, BG313200AV, BG217800AV, VT551953AVNote:This is now a kit made of heavy duty wire. FRONT AND BACK BELT GUARD.

Filter Element #01AE9C

Element only for older WL003701AV 2 piece style air filter assembly.

Pressure Gauge, Right-mount, 1.5 IN 300 PSI GAUGE 1/8" NPT LOW #01A8A6

Old Part Numbers: GA016300AV, GA016310AV, GA016303AV, GA016308AV0-300 PSI, 1/8" NPT, Right-mount, 1.625" FACE

New Pump with Flywheel #01AFAF

Old Part Numbers: VT482200AJ, VT480000KB, VT480000AV, VT481400AJ, VT470200KBHas a 38mm stroke. Used on 120V Electric units. Note: New style pump has only one airline coming off of the pump head. Order the CTD1238ADAPTKIT if your old pump...

New Pump with Flywheel #01AAE1

Old Part Numbers: VT470401KB, VT472200AJ, VT490000AV, VT471400AJ, VT232605KB, VT470000KB, VT490000SJ, VT470000AJ, VT4723 Has a 55mm stroke. Campbell Hausfeld VT2030, VT4723, VT4923 Twin Cylinder 3.7HP VT Pump. Recommended for 240V and gas units. Same...

PLASTIC AIR FILTER W/ELEMENT Style 1 #01A8F4

Old Part Numbers: ST073919AV, WL012000AV, WL012300AVFilter - All plastic, 1/2" MPT. Uses 04 element, 2" diameter. Order extra for a backup! Replace this often (especially in dusty environments) to keep your pump from damage.

CHECK VALVE WITH PORT ASSEMBLY VS/VT-PROD SERV #01A96A

Old Part Numbers: CV218401AJ, CV220301AJ, CV221502AJ, CV221502AV

Quad Head Fastener Kit #01A8E8

Cylinder HEAD RPLCMT KIT, VT #01A8AE

Old Part Numbers: VT-4, VT252901AJ, VT273200AJOrder this kit for older VT pumps using this style gasket Kit includes: head, bolts, filter, gasket, tube, etc. Note: New style pump head has only one air line coming off of pump head. If your old pump had 2...

SET SCR 1/4-20 X 3/4 #01A976

Old Part Numbers: ST012200AVThese screws are currently out of stock at the manufacturer and can not be purchased. 

Flywheel, 10" A-Section, Machined #01A8F0

Old Part Numbers: PU015900AG, PU015900AJ, PU015900AV10" O.D. x 3/4" ID.

BELT 50" A48 V-BELT AX48 SVC #01AB50

Old Part Numbers: BT020400AV, BT020401AV, 4L500W, 4L500Used on models VT631504, VT559506, VT634500.

Ex Tube #01AB4B

MOLDED FERRULE, 1/2" #01AF4F

Old Part Numbers: ST067300AV, HF004500AV

Sight Glass Kit #01A8F2

WASHER PLAIN TYPE A 516N ZINC #01A97E

Old Part Numbers: ST070930AV, AL136000AV

FLANGE NUT 3/8-16 #01A962

Old Part Numbers: STD-335Also used on models VT627000, VT629100, VT618202 and VT622001

.250 THUMB SCREW BRASS DRAIN COCK #01A926

Old Part Numbers: D-1403, D-1401, STD-301, ST030100AVKeep your tank from rusting. Replace this if leaking or will not work. 1/4" Thread & 9/16" Hex D-1401 supersedes to D-1403.

150 PSI ASME SAFETY VALVE #01B5EA

Axle Bolt Hex Head #01A960

Old Part Numbers: STD-334Note: Also used on models VT627000, VT629100, VT618202, and VT622001

1.5 DIA RUBBER O-RING #01AADD

Condor Pressure Switch Unloader Valve Kit, 90-degree #01AAC1

Old Part Numbers: CW210000AV, EV1WSICondor unloader valve for MDR21130 and other popular pressure switches. Click here for other unloader valves.Requires 1/4" nylon tubing.

SET SREW 38-16 X 34 #01A8CE

For flywheel, (standard thread, not metric).

Motor/ps Cord #01AAB9

PLASCREW-BLACK 5/8" LONG #01A9E6

Note: Also used on models WL650103, WL651900, WL650703, WL651004, WL651000AJ.

Electric Motor, RGB SPL Zhengli #01A992

Old Part Numbers: MC013200AV, MC05502SJ, MC015500AJ, MC015502AJ, MC015502SJ, MC015502IP, MC019800IP, MC019800SJ, MC035601AV, MC027800AJ, MC035601AJ, MC035602SJ, MC018000IPFits model # VT629100 and others. 3450 RPM. See Specs for more info...

Plug 1/8-27 SQ HD #059484

Old Part Numbers: ST022300AV, STD-2231/8" NPT .

BEARING CAP ASSEMBLY BASIC #01A8E2

Quad Valve Plate Assy #01A8E6

Old Part Numbers: TQ011300AJ, TQ900400AJ, VT470800AJIncludes the Valve Plate with Valves installed, upper and lower Gaskets ONLY. This replaces part numbers TQ011300AJ, TQ900400AJ and VT470800AJ. Torque to 200 in/lbs. Poor performance or air leaks...

Compression Nut #01AF47

5/16-18 SPINLOCK NUT #01A980

Old Part Numbers: ST146000AV

Piston Service Kit #01A8BC

Old Part Numbers: VT-55, VT005501AGReplace this if the rings do not rotate freely in their grooves. Note: Kit does not include rings

VT Piston Ring Set #01A8F6

Old Part Numbers: 1R398, TQ900700AJThis kit will NOT fit pumps with 3" Piston! For v-twin pumps, order qty. 2 for a complete ring set! Includes rings for both pistons. This kit contains two different style rings. Install rings that match the ones being...

Gasket-inlet #01A8EA

Fits between head and filter assby. (old style)

WHEEL, 10" BLACK HUB #01A95E

Old Part Numbers: WA-25, WA002500AV, WA003900AV, WA002400AV, WA002401AVOrder hubcap also if needed. For WL611700AJ Compressor. For WL611800 Compressor and others.