PNMTC WHL 10 CNTRD GREY HUB WHEEL #11639F

Old Part Numbers: WA005501AVWheel - 10 inch.

Check Valve Kit Unloader Line Kit #116397

Old Part Numbers: PS846234VM, MP513901AJ, MP513901SJMay need this too if converting from old style pump to new pump. Check valve is NOT included in kit. May need to order new check valve with 1/8" port on side in addition to this kit if your check valve...

Round Foot Isolator Pad #116360

Old Part Numbers: ST158300AVKeeps your compressor from dancing around!

1/2" MPT Air Filter Assembly #0A12A0

Metal Assy, 1/2" MPT x Ht 3.80" x W 3.25" Twist Lock. Uses 06 element.

Filter Element, Felt #01A8EE

Ball Bearing #01A8DC

BALL PLUG 7/8 #01ABA5

Crankcase Breather Vh & Vt CHA #01AA8D

Breather assembly for models for threaded type crankcase. This assembly tightens into the crankcase; typically has an oil level sight gauge.

SHAFT KEY 3/16 X 1 #01A8C8

Old Part Numbers: PM004904AVFor flywheel.

Air Filter Assembly with Element VH300 #01A8EC

Old Part Numbers: MP333200AJ, MP333200SJMetal air filter with element, 1/2" MPT. For VT, TQ, and VH style pumps. This new metal style replaces the plastic felt style. If you need the filter element only, order VH901800AV. Note: This new-style...

FILTER COVER FRONT #01AEA0

Front air filter cover. Uses element ST163100AV. Use VH901700AV to replace entire assby.

CAMPBELL CHECK VALVE KIT Unloader Line Kit #01AC7F

Old Part Numbers: PS846234VM, MP513901AJMay need this too if converting from old style pump to new pump. Check valve is NOT included in kit. May need to order new check valve with 1/8" port on side in addition to this kit if your check valve does NOT...

Oil Dipstick with Filter Breather Assembly Grey #01A8D8

Old Part Numbers: VT041703AJ, VT041703AVNote: Dipstick model for 'push in' type crankcase.

Torx Screw #01AB9F

Filter Element #01AE9C

Element only for older WL003701AV 2 piece style air filter assembly.

Air Filter Element (18013) #01AB9D

3" diameter filter.

New Pump with Flywheel #01AFAF

Old Part Numbers: VT482200AJ, VT480000KB, VT480000AV, VT481400AJ, VT470200KBHas a 38mm stroke. Used on 120V Electric units. Note: New style pump has only one airline coming off of the pump head. Order the CTD1238ADAPTKIT if your old pump...

VT4923 Air Compressor Pump Replacement, Complete Assembly, Single-Stage #01AAE1

Old Part Numbers: VT470401KB, VT472200AJ, VT490000AV, VT471400AJ, VT232605KB, VT470000KB, VT490000SJ, VT470000AJ, VT4723  Complete pump with flywheel and air filter assembly. Has a 55mm stroke. Campbell Hausfeld VT2030, VT4723, VT4923 Twin Cylinder...

PLASTIC AIR FILTER W/ELEMENT Style 1 #01A8F4

Old Part Numbers: ST073919AV, WL012000AV, WL012300AVFilter - All plastic, 1/2" MPT. Uses 04 element, 2" diameter. Order extra for a backup! Replace this often (especially in dusty environments) to keep your pump from damage.

Bg Bracket Tf Gas Unit #01A9DA

Quad Head Fastener Kit #01A8E8

Cylinder HEAD RPLCMT KIT, VT #01A8AE

Old Part Numbers: VT-4, VT252901AJ, VT273200AJOrder this kit for older VT pumps using this style gasket Kit includes: head, bolts, filter, gasket, tube, etc. Note: New style pump head has only one air line coming off of pump head. If your old pump had 2...

SET SCR 1/4-20 X 3/4 #01A976

Old Part Numbers: ST012200AVThese screws are currently out of stock at the manufacturer and can not be purchased. 

BELT A49 51 OD #01AB9B

Old Part Numbers: BT023100AVReplaced by BT023101AV.

Flywheel, 10" A-Section, Machined #01A8F0

Old Part Numbers: PU015900AG, PU015900AJ, PU015900AV10" O.D. x 3/4" I.D.

Brace Assembly Long #01ABB1

Sight Glass Kit #01A8F2

WASHER PLAIN TYPE A 516N ZINC #01A97E

Old Part Numbers: ST070930AV, AL136000AV

FLANGE NUT 3/8-16 #01A962

Old Part Numbers: STD-335Also used on models VT627000, VT629100, VT618202 and VT622001

.250 Thumb Screw Brass Drain Cock #01A926

Old Part Numbers: D-1403, D-1401, STD-301, ST030100AVKeep your tank from rusting. Replace this if leaking or will not work. 1/4" Thread & 9/16" Hex D-1401 supersedes to D-1403.

Hex Mach Head #01ABB5

Pressure Gauge, 1/4" MPT #01AA6F

Left-mounted gauge, 250 PSI, 1/4" MPT with 2" diameter face. Note - Order this item for model EX55803VA and others.

1/4 UNIVERSAL COUPLER #01AC9F

SET SREW 38-16 X 34 #01A8CE

For flywheel, (standard thread, not metric).

PULLEY 3.0 OD X 3/4" BORE #01ABAF

Old Part Numbers: PU015400AG

BULLWHIP THROTTLE CONTROL #01ABA9

Old Part Numbers: CV006404AVNote: Order this item for 4B241B model.

Plug 1/8-27 SQ HD #059484

Old Part Numbers: ST022300AV, STD-2231/8" NPT .

SOLBERG FILTER ASSEMBLY METAL FS06050 Replaced by ST073915AV #01B46F

Old Part Numbers: ST073913AV Protect your pump from damage. Includes filter element & housing. SIZE: 1/2" MPT x Ht 3.80" x W 3.25" Twist Lock

BEARING CAP ASSEMBLY BASIC #01A8E2

Quad Valve Plate Assembly #01A8E6

Old Part Numbers: TQ011300AJ, TQ900400AJ, VT470800AJQuad Valve Plate Assembly. Includes the valve plate with valves installed, upper and lower gaskets ONLY. This replaces part numbers TQ011300AJ, TQ900400AJ, and VT470800AJ. Torque to 200 in/lbs. Poor...

5/16-18 SPINLOCK NUT #01A980

Old Part Numbers: ST146000AV

BRAIDED HOSE - FLARE x NPT #01ABAD

Use this with the replacement unloader/pilot valve (00010)

Piston Service Kit #01A8BC

Old Part Numbers: VT-55, VT005501AGReplace this if the rings do not rotate freely in their grooves. Note: Kit does not include rings

VT Piston Ring Set #01A8F6

Old Part Numbers: 1R398, TQ900700AJThis kit will NOT fit pumps with 3" Piston! For v-twin pumps, order qty. 2 for a complete ring set! Includes rings for both pistons. This kit contains two different style rings. Install rings that match the ones being...

Gasket-inlet #01A8EA

Fits between head and filter assby. (old style)

Oil Seal-vs/vt #01A8E0

Connecting Rod, MACHINING #01B036

For all VT4700 and VT4800 pumps. Replace this if broken or frozen to crankshaft. If frozen to crank, remove, then polish crank and install new rod.

Manifold Assembly with Gauges, Ridgid #01ABAB

Manifold Assembly with Gauges, Ridgid. Includes gauges, regulator, safety valve and couplers.

PNMTC WHL 10 CNTRD GREY HUB WHEEL #01ABA7

Wheel - 10 inch.

Piston Pin #01A8BA

Pilot Unloader Valve, 105/135 PSI #01A8A4

Male Flare inlet and 1/2" MPT outlet. Cuts in at 105 and out at 135. This is the brains of your air compressor. It unloads pressure to the tank when it hits 135 psi. Do NOT attempt to adjust this part unless you have experience in adjusting unloader...

Crankshaft Assy. #01D8C6

For pumps that end in AV ONLY!! Includes crankshaft, bearings, pistons, rings, conrods and pistons. Note: Does not fit the VT490000AV pump.