Check Valve Kit Unloader Line Kit #116397

Old Part Numbers: PS846234VM, MP513901AJ, MP513901SJMay need this too if converting from old style pump to new pump. Check valve is NOT included in kit. May need to order new check valve with 1/8" port on side in addition to this kit if your check valve...

1/2" MPT Air Filter Assembly #0A12A0

Metal Assy, 1/2" MPT x Ht 3.80" x W 3.25" Twist Lock. Uses 06 element.

Compression Conn Fitting Assembly 1/2 X 3/8 MPT #01A902

Old Part Numbers: ST159001AV, ST159001AJCompression Connector, 1/2" Comp X 3/8" MPT. 

TAPPING SCREW10-24 X 58 Replaced by ST073277AV #01A98A

Old Part Numbers: ST042400AVUsed on model VT634500

KEY .1875 SQX1.44 LONG #01A97A

Filter Element, Felt #01A8EE

Ball Bearing #01A8DC

Crankcase Breather Vh & Vt CHA #01AA8D

Breather assembly for models for threaded type crankcase. This assembly tightens into the crankcase; typically has an oil level sight gauge.

Handle VT VS WL Black #01A964

Old Part Numbers: HL001800BH, VS001000AV

SHAFT KEY 3/16 X 1 #01A8C8

Old Part Numbers: PM004904AVFor flywheel.

3 Port Regulator #01A92E

Old Part Numbers: RE206901AV, RE206200AVAdjustable air pressure knob assembly (gauge sold separately).

Air Filter Assembly with Element VH300 #01A8EC

Old Part Numbers: MP333200AJ, MP333200SJMetal air filter with element, 1/2" MPT. For VT, TQ, and VH style pumps. This new metal style replaces the plastic felt style. If you need the filter element only, order VH901800AV. Note: This new-style...

FILTER COVER FRONT #01AEA0

Front air filter cover. Uses element ST163100AV. Use VH901700AV to replace entire assby.

CAMPBELL CHECK VALVE KIT Unloader Line Kit #01AC7F

Old Part Numbers: PS846234VM, MP513901AJMay need this too if converting from old style pump to new pump. Check valve is NOT included in kit. May need to order new check valve with 1/8" port on side in addition to this kit if your check valve does NOT...

EXHAUST TUBE VT 20GAL GAS #05944F

Old Part Numbers: VT045300AP

Oil Dipstick with Filter Breather Assembly Grey #01A8D8

Old Part Numbers: VT041703AJ, VT041703AVNote: Dipstick model for 'push in' type crankcase.

BUSHING ADAPTER 14-18 X 18-27 #01A934

Old Part Numbers: 31551/4" x 1/8" Adapter. If you need a 1/4" MPT fitting, but the part you have is only 1/8" MPT, then use this bushing adapter.

Filter Element #01AE9C

Element only for older WL003701AV 2 piece style air filter assembly.

Pressure Gauge, Right-Mount, 1.5 IN 300 PSI Gauge 1/8" NPT Low #01A8A6

Old Part Numbers: GA016300AV, GA016310AV, GA016303AV, GA016308AV0-300 PSI, 1/8" NPT, Right-mount, 1.625" FACE

New Pump with Flywheel #01AFAF

Old Part Numbers: VT482200AJ, VT480000KB, VT480000AV, VT481400AJ, VT470200KBHas a 38mm stroke. Used on 120V Electric units. Note: New style pump has only one airline coming off of the pump head. Order the CTD1238ADAPTKIT if your old pump...

New Pump with Flywheel #01AAE1

Old Part Numbers: VT470401KB, VT472200AJ, VT490000AV, VT471400AJ, VT232605KB, VT470000KB, VT490000SJ, VT470000AJ, VT4723Has a 55mm stroke. Campbell Hausfeld VT2030, VT4723, VT4923 Twin Cylinder 3.7HP VT Pump. Recommended for 240V and gas units. Same...

PLASTIC AIR FILTER W/ELEMENT Style 1 #01A8F4

Old Part Numbers: ST073919AV, WL012000AV, WL012300AVFilter - All plastic, 1/2" MPT. Uses 04 element, 2" diameter. Order extra for a backup! Replace this often (especially in dusty environments) to keep your pump from damage.

ASME SAFETY VALVE 140 PSI 1/4 NPT #01ACAC

Old Part Numbers: V-203600BLRating 140 PSI If your valve leaks below the pressure listed on the side of the valve, replace this vital safety feature. Used with WL650801.

Quad Head Fastener Kit #01A8E8

Cylinder HEAD RPLCMT KIT, VT #01A8AE

Old Part Numbers: VT-4, VT252901AJ, VT273200AJOrder this kit for older VT pumps using this style gasket Kit includes: head, bolts, filter, gasket, tube, etc. Note: New style pump head has only one air line coming off of pump head. If your old pump had 2...

Str Comp Conn Fitting #01A99A

SET SCR 1/4-20 X 3/4 #01A976

Old Part Numbers: ST012200AVThese screws are currently out of stock at the manufacturer and can not be purchased. 

BELT A49 51 OD #01AB9B

Old Part Numbers: BT023100AVReplaced by BT023101AV.

Flywheel, 10" A-Section, Machined #01A8F0

Old Part Numbers: PU015900AG, PU015900AJ, PU015900AV10" O.D. x 3/4" I.D.

Brace Assembly Long #01ABB1

MOLDED FERRULE, 1/2" #01AF4F

Old Part Numbers: ST067300AV, HF004500AV

Sight Glass Kit #01A8F2

WASHER PLAIN TYPE A 516N ZINC #01A97E

Old Part Numbers: ST070930AV, AL136000AV

FLANGE NUT 3/8-16 #01A962

Old Part Numbers: STD-335Also used on models VT627000, VT629100, VT618202 and VT622001

Axle Bolt Hex Head #01A960

Old Part Numbers: STD-334Note: Also used on models VT627000, VT629100, VT618202, and VT622001

Hex Mach Head #01ABB5

CYLINDER AIR #01BE57

SET SREW 38-16 X 34 #01A8CE

For flywheel, (standard thread, not metric).

PLASCREW-BLACK 5/8" LONG #01A9E6

Note: Also used on models WL650103, WL651900, WL650703, WL651004, WL651000AJ.

PULLEY 3.0 OD X 3/4" BORE #01ABAF

Old Part Numbers: PU015400AG

Cap #01A96E

Cap for Oil Drain Extension

Plug 1/8-27 SQ HD #059484

Old Part Numbers: ST022300AV, STD-2231/8" NPT .

14-18 NPT STEEL NIPPLE #01A9FF

Old Part Numbers: HF-24, HF002400AV, HF007301AV

BEARING CAP ASSEMBLY BASIC #01A8E2

Quad Valve Plate Assembly #01A8E6

Old Part Numbers: TQ011300AJ, TQ900400AJ, VT470800AJQuad Valve Plate Assembly. Includes the valve plate with valves installed, upper and lower gaskets ONLY. This replaces part numbers TQ011300AJ, TQ900400AJ, and VT470800AJ. Torque to 200 in/lbs. Poor...

Compression Nut #01AF47

Compression Nut

Comp Fitting #01B024

Piston Service Kit #01A8BC

Old Part Numbers: VT-55, VT005501AGReplace this if the rings do not rotate freely in their grooves. Note: Kit does not include rings

VT Piston Ring Set #01A8F6

Old Part Numbers: 1R398, TQ900700AJThis kit will NOT fit pumps with 3" Piston! For v-twin pumps, order qty. 2 for a complete ring set! Includes rings for both pistons. This kit contains two different style rings. Install rings that match the ones being...

Gasket-inlet #01A8EA

Fits between head and filter assby. (old style)

WHEEL, 10" BLACK HUB #01A95E

Old Part Numbers: WA-25, WA002500AV, WA003900AV, WA002400AV, WA002401AVOrder hubcap also if needed. For WL611700AJ Compressor. For WL611800 Compressor and others.

SELF TAPPING SCREW SET (6 PK) #01A94E

Old Part Numbers: ST074415AV, ST120200AV, ST073236AVIncludes six (6) screws.